* New doodad: Electric Trapdoor. It is a horizontal version of the
Electric Door. Opens while powered by a button or a switch and closes
when it loses power.
* The Box doodad will reset to its original location if it receives a
power signal from a linked Button or Switch. So for box pushing
puzzles you can add a reset button in case the boxes get stuck.
* Refactored the Doodad build scripts into many Makefiles for easier
iteration (don't need to compile ALL doodads to test one).
Updates to the JavaScript API for doodads:
* Self.MoveTo(Point) is now available to set the actor's position in
world coordinates.
* The loading screen for Edit and Play modes is stable and the risk of
game crash is removed. The root cause was the setupAsync() functions
running on a background goroutine, and running SDL2 draw functions
while NOT on the main thread, which causes problems.
* The fix is all SDL2 Texture draws become lazy loaded: when the main
thread is presenting, any Wallpaper or ui.Image that has no texture
yet gets one created at that time from the cached image.Image.
* All internal game logic then uses image.Image types, to cache bitmaps
of Level Chunks, Wallpaper images, Sprite icons, etc. and the game is
free to prepare these asynchronously; only the main thread ever
Presents and the SDL2 textures initialize on first appearance.
* Several functions had arguments cleaned up: Canvas.LoadLevel() does
not need the render.Engine as (e.g. wallpaper) textures don't render
at that stage.
* Holding Shift while pressing arrow keys in the editor will scroll by
just 1 pixel per tick to aid in precise debugging with the Zoom In/Out
feature.
* The keybinds used in canvas_editable.go to catch the arrow keys are
updated to use our nice keybind package. As a consequence, the WASD
keys will also scroll the level.
* The "d for Doodads" keybind is renamed "q" so as not to open the
Doodads window whenever scrolling right using the WASD keys.
WorldIndexAt() translates the pixel below the mouse cursor in screen
space (0,0 at top-left corner of the application window) into a world
coordinate in the level shown inside the canvas, taking into account the
canvas's position on the window and the scroll position.
It now translates correctly when zoom In or Out, so the "Abs:" mouse
position level in the status bar shows correctly.
Zoom features that are still jank:
- Scrolling while zoomed in, the chunks to the top/left start unloading
too rapidly and outpacing the scroll, eventually level is invisible
- Drawing and committing pixels to the image while zoomed in/out is
unpredictable where the pixels actually land.
- Actors in the level don't move or zoom at all.
* Got the level chunks AND the wallpaper to both scale UP and DOWN
consistently together.
* Trying to draw new pixels while zoomed in/out ends up offsetting the
pixels by 2X still. Still seems an issue between screen coordinates
and world coordinates. Zoom in 2X and try and draw a line 64px from
the corners of the screen? The committed line appropriately lands at
the 64px coord on the level data but, zoomed in, it appears 2X to the
right on the screen from where I dropped the cursor!
* When zooming OUT, the limit on number of chunks the viewport will try
and render is not increased, leaving dead space in the screen; more
chunks should render when there's room.
* Instead of a simple "cur. ver != latest ver" check, parse the Major,
Minor and Patch components and do a detailed check.
* So a x.x.1 release could be made for a specific platform that had a
bad build, and it won't mind when it sees the latest version is the
older x.x.0 build that other platforms had working fine.
* Free (shareware) versions of the game will not be able to Publish
Levels (attach custom doodads to the level file) and they will not be
able to load a level which relies on embedded doodads.
* The UI for the Publish Level window is still available, but clicking
on the confirm button will just open the Register (License) window.
* When loading a level containing embedded doodads: if some can't load
because they're embedded and you're using the free version of the
game, the error message is customized to reflect that.
* The scrollbox by which the game follows the player character has been
revised, it is now an offset away from the window's center instead of
fixed pixel distances from the window's edges.
* Mobile form-factor (Pinephone) now scrolls OK instead of jerking back
and forth rapidly when moving left.
* The Publisher is all hooked up. No native Save File dialogs yet, so
uses the dev shell Prompt() to ask for output filename.
* Custom-only or builtin doodads too can be stored in the level's file
data, at "assets/doodads/*.doodad"
* When loading the embedded level in the Editor: it gets its custom
doodads out of its file, and you can drag and drop them elsehwere,
link them, Play Mode can use them, etc. but they won't appear in the
Doodad Dropper if they are not installed in your local doodads
directory.
* Fleshed out serialization API for the Doodad files:
- LoadFromEmbeddable() looks to load a doodad from embeddable file
data in addition to the usual places.
- Serialize() returns the doodad in bytes, for easy access to embed
into level data.
- Deserialize() to parse and return from bytes.
* When loading a level that references doodads not found in its embedded
data or the filesystem: an Alert modal appears listing the missing
doodads. The rest of the level loads fine, but the actors referenced
by these doodads don't load.
Palette swatches gain a new property: Pattern.
Patterns are grayscale textures that the swatch color will sample
against when drawing pixels to the level, by taking the world coordinate
modulo a value inside the texture.
A few algorithms were tried (Screen, Overlay), this branch lands on one
that tries to cast the color from grayscale which comes out rather dark;
to get a patterned color to look black while still seeing the pattern,
the color needs to be as bright as #777 to get the effect.
* You can now browse for a custom wallpaper image to use with your
levels. A platform-native file picker dialog is used (no WASM support)
* In the New/Edit Level Properties dialog, the Wallpaper drop-down
includes an option to browse for a custom map.
* When editing an existing level: the wallpaper takes effect immediately
in your level once the file is picked. For NEW levels, the wallpaper
will appear once the "Continue" button is pressed.
* All common image types supported: png, jpeg, gif.
* The wallpaper is embedded in the level using the filepath
"assets/wallpapers/custom.b64img" as a Base64-encoded blob of the
image data.
* The `doodad show` command will list the names and sizes of files
embedded in levels. `doodad show --attachment <name>` will get an
attachment and print it to the console window.
* To extract a wallpaper image from a level:
`doodad show -a assets/wallpapers/custom.b64img | base64 -d > out.png`
* The F4 key to draw collision boxes works reliably again: it draws the
player's hitbox in world-space using the canvas.DrawStrokes()
function, rather than in screen-space so it follows the player
reliably.
* The F4 key also draws hitboxes for ALL other actors in the level:
buttons, enemies, doors, etc.
* The level geometry collision function is updated to respect a doodad's
declared Hitbox from their script, which may result in a smaller box
than their raw Canvas size. The result is tighter collision between
doodads, and Boy's sprite is rather narrow for its square Canvas so
collision on rightward geometry is tighter for the player character.
* Collision checks between actors also respect the actor's declared
hitboxes now, allowing for Boy to get even closer to a locked door
before being blocked.
New doodad interactions:
* Sticky Buttons will emit a "sticky:down" event to linked doodads, with
a boolean value showing the Sticky Button's state.
* Normal Buttons will listen for "sticky:down" -- when a linked Sticky
Button is pressed, the normal Button presses in as well, and stays
pressed while the sticky:down signal is true.
* When the Sticky Button is released (e.g. because it received power
from another doodad), any linked buttons which were sticky:down
release as well.
* Switch doodads emit a new "switch:toggle" event JUST BEFORE sending
the "power" event. Sensitive Doodads can listen for switches in
particular this way.
* The Electric Door listens for switch:toggle; if a Switch is activated,
the Electric Door always flips its current state (open to close, or
vice versa) and ignores the immediately following power event. This
allows doors to toggle on/off regardless of sync with a Switch.
Other changes:
* When the player character dies by fire, instead of the message saying
"Watch out for fire!" it will use the name of the fire swatch that
hurt the player. This way levels could make it say "Watch out for
spikes!" or "lava" or whatever they want. The "Fire" attribute now
just means "instantly kills the player."
* Level Editor: You can now edit the Title and Author name of your level
in the Page Settings window.
* Bugfix: only the player character ends the game by dying in fire.
Other mobile doodads just turn dark but don't end the game.
* Increase the size of Trapdoor doodad sprites by 150% as they were a
bit small for the player character.
* Rename the game from "Project: Doodle" to "Sketchy Maze"
* The crumbly floor doodad was made 50% larger.
* New doodad: Small Key and Small Key Door. These work like the colored
doors and locks except each Small Key is consumed when it unlocks a
door. The door's appearance is of iron bars.
* The inventory HUD displays a small quantity label in the lower-right
corner of items that have a quantity, such as the Small Key. This is
done as a Canvas.CornerLabel string attribute on uix.Canvas.
* The "give all keys" cheat adds 99 Small Keys to your inventory.
* The "Use Key" (Q or Spacebar) now activates the Warp Door instead of a
collision event doing so.
* Warp Doors are now functional: the player opens a door, disappears,
the door closes; player is teleported to the linked door which opens,
appears the player and closes.
* If the player exits thru a Blue or Orange door which is disabled
(dotted outline), the door still opens and drops the player off but
returns to a Disabled state, acting as a one-way door.
* Clean up several debug log lines from Doodle and doodad scripts.
* The blue and orange ON/OFF state blocks have all been increased in
size to better match the player character (42x42 up from 33x33)
* Added a new mob: the Red Bird. It flies back and forth while
maintaining its altitude, similar to the Red Azulian. Planned AI
behavior is to divebomb the player when it gets close. Dive sprites
are included but not yet hooked up in JavaScript.
* Warp Doors! (WIP). They have a golden "W" on them and come in three
varieties: Brown, Blue and Orange. The blue and orange ones are
sensitive to the State Block and will become dotted outlines when
inactive (and can not be entered in this state). The door opens for
the player character, makes him disappear, then closes again. The plan
is it will then warp you to the location of a linked Warp Door
elsewhere on the level, but for now it will just make the player
re-appear after completing the Close Door animation.
* Added Feature Flag support, run doodle with --experimental to enable
all flags. Eraser Tool is behind a feature flag now.
* + and - on the top row of keyboard keys will zoom the drawing in and
out in Edit Mode. The wallpaper zooms nicely enough, but level
chunkers need work.
* A View menu is added with Zoom in/out, reset zoom, and scroll to
origin options. The whole menu is behind the Zoom feature flag.
* Update README with lots of details for fun debug mode options to play
around with.
* When editing a doodad in the Editor Mode, the toolbar has a "Lyr."
button that opens the Layers window.
* The Layers window allows switching the active doodad layer that you
are drawing on, as well as create and rename layers.
* With this feature, Doodads may be fully drawn in-game, including
adding alternate named layers for animations and multiple-state
doodads.
* Update the Pager component to have a configurable MaxPageButtons.
Controls that have more pages than this limit will stop having buttons
drawn after the limit. The "Forward" and "Next" buttons can still
navigate into the extra pages.
* Refactored and centralized the various popup windows in Editor Mode
into editor_ui_popups.go; the SetupPopups() and various methods such
as ShowPaletteWindow() and ShowDoodadDropper() make management of
popups simple for the editor_ui!
* The Menu Bar in Editor Mode now has context-specific tools in the
Tools menu: the Doodad Dropper for levels and Layers for doodads.
* Bugfix the Palette Editor window to work equally between Levels and
Doodads, by only having it care about the Palette and not the Level
that owns it.
* Adds global modal support in the pkg/modal/ package. It has easy
Alert() and Confirm() methods to prompt the user before calling a
callback function on affirmative response.
* Modals have global app state: they're processed in the main loop in
pkg/doodle.go similar to the global command shell.
* When a modal is active, a semitransparent black frame covers the
screen (gameplay loop paused, last game frame rendered below) and the
modal window appears on top.
* The developer console retains higher priority than the modal system
and always renders on top.
* Editor Mode: track when the level pixels have been modified, and
confirm the user about unsaved changes when they attempt to close the
level (New, Open, Close, etc.)
* Global: the Escape key no longer immediately shuts down the game, but
will confirm the user's intent via a modal.
* File->Quit in the Editor Mode also invokes the confirm shutdown modal.
* Start the program window maximized with the `-w maximized` CLI option.
* Move the Doodad Palette off the right-side dock of the Editor Scene and
into its own pop-up window: the DoodadDropper.
* Shrink the width of the Color Palette panel and show only the colors in
the buttons. The name of the swatch is available in the mouse-over tooltip.
* Added an "Edit" button to the Color Palette. It opens a Palette Editor
window where you can rename, change colors and attributes of existing colors
OR insert new colors into your palette. (Deleting colors not yet supported).
* level.Chunker gets a Redraw method: invalidates all cached textures of all
chunks forcing the level to redraw itself, possibly with an updated palette.
* Tightens up the surface area of API methods available to the
JavaScript VMs for doodads. Variables and functions are carefully
passed in one-by-one so the doodad script can only access intended
functions and not snoop on undocumented APIs.
* Wrote tons of user documentation for Doodad Scripts: documented the
full surface area of the exposed JavaScript API now that the surface
area is known and limited.
* Early WIP code for the Campaign JSON
* Take advantage of the new Window Manager feature of the UI toolkit.
* Move the MenuScene's "New Level" and "Play/Edit Level" windows into
stand-alone functions in new pkg/windows/ package. The 'windows'
package is isolated from the rest of Doodle and communicates using
config variables and callback functions to avoid circular dependency.
* MenuScene calls the window constructors from the new package.
* Add an "Options" button to the Menu Bar in the Editor Scene, which
opens the "New Level" window to allow changing the wallpaper or
bounding type of the level currently being edited.
* Move the cheat codes into their own file, cheats.go
* Player character now experiences acceleration and friction when
walking around the map!
* Actor position and movement had to be converted from int's
(render.Point) to float64's to support fine-grained acceleration
steps.
* Added "physics" package and physics.Vector to be a float64 counterpart
for render.Point. Vector is used for uix.Actor.Position() for the sake
of movement math. Vector is flattened back to a render.Point for
collision purposes, since the levels and hitboxes are pixel-bound.
* Refactor the uix.Actor to no longer extend the doodads.Drawing (so it
can have a Position that's a Vector instead of a Point). This broke
some code that expected `.Doodad` to directly reference the
Drawing.Doodad: now you had to refer to it as `a.Drawing.Doodad` which
was ugly. Added convenience method .Doodad() for a shortcut.
* Moved functions like GetBoundingRect() from doodads package to
collision, where it uses its own slimmer Actor interface for just the
relevant methods it needs.
* Added an inventory system for actors as a replacement to the arbitrary
key/value data store. Colored keys now add themselves to the player's
inventory, and colored doors check the inventory.
* Inventory is a map[string]int between doodad filenames
(red-key.doodad) and quantity (0 for key items/unlimited qty).
* API methods to add and remove inventory.
* Items HUD appears in Play Mode in lower-left corner showing doodad
sprites of all the items in the Player's inventory.
* Recent collision update caused a regression where the player would get
"stuck" while standing on top of a solid doodad, unable to walk left
or right.
* When deciding if the actor is on top of a doodad, use the doodad's
Hitbox (if available) instead of the bounding box. This fixes the
upside-down trapdoor acting solid when landed on from the top, since
its Hitbox Y coordinate is not the same as the top of its sprite.
* Cheats: when using the noclip cheat in Play Mode, you can hold down
the Shift key while moving to only move one pixel at a time.
* Fix the level collision bug that allowed clipping thru a ceiling while
climbing up a wall.
* Fix the scrolling behavior to keep the character on-screen no matter
how fast the character is moving, especially downwards.
* Increase player speed and gravity.
* New cheat: "ghost mode" disables clipping for the player character.
* Mark an actor as "grounded" if they fall and are stopped by the lower
level border, so they may jump again.
* Two-state Buttons now also subscribe to the state change message, so
other on/off buttons in the same level update to match the state of
the button that was hit.
* Add lock mutexes around the scripting engine to protect from
concurrent event handlers.
Add new doodads:
* Start Flag: place this in a level to set the spawn point of the player
character. If no flag is found, the player spawns at 0,0 in the top
corner of the map. Only use one Start Flag per level, otherwise the
player will randomly spawn at one of them.
* Crumbly Floor: a solid floor that begins to shake and then fall apart
after a moment when a mobile character steps on it. The floor respawns
after 5 seconds.
* State Blocks: blue and orange blocks that toggle between solid and
pass-thru whenever a State Button is activated.
* State Button: a solid "ON/OFF" block that toggles State Blocks back
and forth when touched. Only activates if touched on the side or bottom;
acts as a solid floor when walked on from the top.
New features for doodad scripts:
* Actor scripts: call SetMobile(true) to mark an actor as a mobile mob
(i.e. player character or enemy). Other doodads can check if the actor
colliding with them IsMobile so they don't activate if placed too close
to other (non-mobile) doodads in a level. The Blue and Red Azulians
are the only mobile characters so far.
* Message.Broadcast allows sending a pub/sub message out to ALL doodads
in the level, instead of only to linked doodads as Message.Publish does.
This is used for the State Blocks to globally communicate on/off status
without needing to link them all together manually.
* Improve the collision detection algorithm so that Actor OnCollide
scripts get called more often WHILE an actor is moving, to prevent a
fast-moving actor from zipping right through the "solid" hitbox and
not giving the subject actor time to protest the movement.
* It's implemented by adding a `Settled` boolean to the OnCollide event
object. When the game is testing out movement, Settled=false to give
the actor a chance to say "I'm solid!" and have the moving party be
stopped early.
* After all this is done, for any pair of actors still with overlapping
hitboxes, OnCollide is called one last time with Settled=true. This is
when the actor should run its actions (like publishing messages to
other actors, changing state as in a trapdoor, etc.)
* The new collision detection algorithm works as follows:
* Stage 1 is the same as before, all mobile actors are moved and
tested against level geometry. They record their Original and New
position during this phase.
* Stage 2 is where we re-run that movement but ping actors being
intersected each step of the way. We trace the steps between
Original and New position, test OnCollide handler, and if it returns
false we move the mobile actor to the Last Good Position along the
trace.
* Stage 3 we run the final OnCollide(Settled=true) to let actors run
actions they wanted to for their collide handler, WITHOUT spamming
those actions during Stage 2.
* This should now allow for tweaking of gravity speed and player speed
without breaking all actor collision checking.
* Add initial Ellipse Tool to the Editor Mode. Currently there's
something wrong with the algorithm and the ellipses have a sort of
'lemon shape' to them.
* Refactor the IterLine/IterLine2 functions to be more consistent.
IterLine used to be the raw algorithm that took a bunch of coordinate
numbers and IterLine2 took two render.Point's and was the main one
used throughout the app. Now, IterLine takes the two Points and the
raw algorithm function removed.
* Implement Brush Sizes for drawtool.Stroke and add a UI to the tools panel
to control the brush size.
* Brush sizes: 1, 2, 4, 8, 16, 24, 32, 48, 64
* Add the Eraser Tool to editor mode. It uses a default brush size of 16
and a max size of 32 due to some performance issues.
* The Undo/Redo system now remembers the original color of pixels when
you change them, so that Undo will set them back how they were instead
of deleting the pixel entirely. Due to performance issues, this only
happens when your Brush Size is 0 (drawing single-pixel shapes).
* UI: Add an IntVariable option to ui.Label to bind showing the value of
an int reference.
Aforementioned performance issues:
* When we try to remember whole rects of pixels for drawing thick
shapes, it requires a ton of scanning for each step of the shape. Even
de-duplicating pixel checks, tons of extra reads are constantly
checked.
* The Eraser is the only tool that absolutely needs to be able to
remember wiped pixels AND have large brush sizes. The performance
sucks and lags a bit if you erase a lot all at once, but it's a
trade-off for now.
* So pixels aren't remembered when drawing lines in your level with
thick brushes, so the Undo action will simply delete your pixels and not
reset them. Only the Eraser can bring back pixels.
* The `doodad` CLI tool got a lot of new commands:
* `doodad show` to verbosely print details about Levels and Doodads.
* `edit-level` and `edit-doodad` to update details about Levels and
Doodads, such as their Title, Author, page type and size, etc.
* Doodads gain a `Hidden bool` that hides them from the palette in
Editor Mode. The player character (Blue Azulian) is Hidden.
* Add some boolProps to the balance/ package and made a dynamic system
to easily configure these with the in-game dev console.
* Command: `boolProp list` returns available balance.boolProps
* `boolProp <name>` returns the current value.
* `boolProp <name> <true or false>` sets the value.
* The new boolProps are:
* showAllDoodads: enable Hidden doodads on the palette UI (NOTE:
reload the editor to take effect)
* writeLockOverride: edit files that are write locked anyway
* prettyJSON: pretty-format the JSON files saved by the game.
* Touching "fire" pixels in a level will pop up the End Level alert box
saying you've died by fire and can restart the level.
* Update level.WriteFile() to prune broken links between actors before
save. So when a linked actor is deleted, the leftover link data is
cleaned up.
* Slight optimization in Canvas.drawStrokes: if either end of the stroke
is not within view of the screen, don't show the stroke.
* New doodads: Switches.
* They come in four varieties: wall switch (background element, with
"ON/OFF" text) and three side-profile switches for the floor, left
or right walls.
* On collision with the player, they flip their state from "OFF" to
"ON" or vice versa. If the player walks away and then collides
again, the switch flips again.
* Can be used to open/close Electric Doors when turned on/off. Their
default state is "off"
* If a switch receives a power signal from another linked switch, it
sets its own state to match. So, two "on/off" switches that are
connected to a door AND to each other will both flip on/off when one
of them flips.
* Update the Level Collision logic to support Decoration, Fire and Water
pixel collisions.
* Previously, ALL pixels in the level were acting as though solid.
* Non-solid pixels don't count for collision detection, but their
attributes (fire and water) are collected and returned.
* Updated the MenuScene to support loading a map file in Play Mode
instead of Edit Mode. Updated the title screen menu to add a button
for playing levels instead of editing them.
* Wrote some documentation.
* The game's tick counter was moved from Doodle.ticks to shmem.Tick
where it is more easily available from every corner of the code.
* Fix a bug in the Level Editor where dragging an already-existing actor
from one part of your map to another, would cause it to lose all its
data (especially its UUID), breaking links to other doodads. Now the
existing Actor catches a ride on the drag object to be reinserted
later.
* Animate the Link Line visualizers between actors. They now animate a
blinking color between magenta and grey-ish.
* Add the other trapdoor directions: Left, Right and Up.
* UI: Show a color square in each Palette Swatch button in Edit Mode.
* Instead of just the label like "solid", "fire", "decoration" it also
shows a square box colored as the swatch color. The label and box
are left-aligned in the button.
* Minor Play Mode physics update:
* The player jump is now limited: they may only continue to move
upwards for 20 ticks, after which they must touch ground before
jumping again.
* Remove the "press Down to move down" button. Only gravity moves you
down.
* Fix a crash in the Editor Mode when you dragged doodads on top of each
other. Source of bug was the loopActorCollision() function, which only
should be useful to Play Mode, and it expected the scripting engine to
be attached to the Canvas. In EditorMode there is no scripting engine.
* Add support for the LineTool and RectTool while in the EditorMode to
easily draw straight lines and rectangle outlines.
* Key bindings were added to toggle tools in lieu of a proper UI to
select the tool from a toolbar.
* "F" for Pencil (Freehand) Tool (since "P" is for "Playtest")
* "L" for Line Tool
* "R" for Rectangle Tool
* If the current edit tool is Actor or Link, use the new drawtool.Stroke
object to draw visual lines connecting every pair of linked actors in
the level. The lines are hidden during normal editing and gameplay and
only appear when you're possibly manipulating your actors and links.
* Add new pkg/drawtool with utilities to abstract away drawing actions
into Strokes and track undo/redo History for them.
* The freehand Pencil tool in EditorMode has been refactored to create a
Stroke of Shape=Freehand and queue up its world pixels there instead
of directly modifying the level chunker in real time. When the mouse
button is released, the freehand Stroke is committed to the level
chunker and added to the UndoHistory.
* UndoHistory is (temporarily) stored with the level.Level so it can
survive trips to PlayScene and back, but is not stored as JSON on
disk.
* Ctrl-Z and Ctrl-Y in EditorMode for undo and redo, respectively.
* Load SDL2 fonts from go-bindata storage so we don't have to ship
external font files on disk.
* Dedupe names of doodads so we don't show double on the front-end
(go-bindata bundled doodads + those on local filesystem)
* Use go-bindata for accessing wallpaper images.
* Better flashed messages walking you through the Link Tool.
* Stylize the title screen (MainScene) by rendering a live example level
as the background wallpaper, with mobile doodads in motion.
* Add RGBA color blending support in WASM build.
* Initial texture caching API for Canvas renderer engine. The WASM build
writes the chunk caches as a "data:image/png" base64 URL on the
browser's sessionStorage, for access to copy into the Canvas.
* Separated the ClickEvent from the MouseEvent (motion) in the WASM
event queue system, to allow clicking and dragging.
* Added the EscapeKey handler, which will abruptly terminate the WASM
application, same as it kills the window in the desktop build.
* Optimization fix: I discovered that if the user clicks and holds over
a single pixel when drawing a level, repeated Set() operations were
firing meaning multiple cache invalidations. Not noticeable on PC but
on WebAssembly it crippled the browser. Now if the cursor isn't moving
it doesn't do anything.
* Initial WebAssembly build target for Doodle in the wasm/ folder.
* Add a new render.Engine implementation, lib/render/canvas that uses
the HTML 5 Canvas API instead of SDL2 for the WebAssembly target.
* Ported the basic DrawLine(), DrawBox() etc. functions from SDL2 to
Canvas context2d API.
* Fonts are handled with CSS embedded fonts named after the font
filename and defined in wasm/index.html
* `make wasm` builds the WASM program, and `make wasm-serve` runs a dev
Go server that hosts the WASM file for development. The server also
watches the dev tree for *.go files and rebuilds the WASM binary
automatically on change.
* This build "basically" runs the game. UI and fonts all work and mouse
movements and clicks are detected. No wallpaper support yet or texture
caching (which will crash the game as soon as you click and draw a
pixel in your map!)
* Debug mode: no longer enables the DebugOverlay (F3) by default, but
does now insert the current FPS counter into the window title bar.
* ui.Frame: set a default "mostly transparent" BG color so the frame
background doesn't render as white.
* Add the MenuScene which will house the game's main menus.
* The "New Level" menu is first to be added.
* UI lets you pick Page Type and Wallpaper using radio buttons.
* Page Type: Unbounded, Bounded (default), No Negative Space, Bordered
* Fix bugs in uix.Canvas to fully support all these page types.
* On the Doodads tab is the Link button to enter the Link Tool.
* Click Link, then click the 1st doodad on the level, then click the 2nd
doodad to complete the link.
* The actors struct in the Level holds the link IDs for each actor.
* Implement the handler code for `return false` when actors are
colliding with each other and wish to act like solid walls.
* The locked doors will `return false` when they're closed and the
colliding actor does not have the matching key.
* Add arbitrary key/value storage to Actors. The colored keys will set
an actor value "key:%TITLE%" on the one who touched the key before
destroying itself. The colored doors check that key when touched to
decide whether to open.
* The trapdoor now only opens if you're touching it from the top (your
overlap box Y value is 0), but if you touch it from below and the door
is closed, it acts like a solid object.
* Events.OnCollide now receives a CollideEvent object, which makes
available the .Actor who collided and the .Overlap rect which is
zero-relative to the target actor. Doodad scripts can use the .Overlap
to see WHERE in their own box the other actor has intruded.
* Update the LockedDoor and ElectricDoor doodads to detect when the
player has entered their inner rect (since their doors are narrower
than their doodad size)
* Update the Button doodads to only press in when the player actually
touches them (because their sizes are shorter than their doodad
height)
* Update the Trapdoor to only trigger its animation when the board
along its top has been touched, not when the empty space below was
touched from the bottom.
* Events.OnLeave now implemented and fires when an actor who was
previously intersecting your doodad has left.
* The engine detects when an event JS callback returns false.
Eventually, the OnCollide can return false to signify the collision is
not accepted and the actor should be bumped away as if they hit solid
geometry.
* Add sync.WaitGroup to some parts of the level collision detection
function and Canvas.Loop() to speed up the frame rate by load
balancing some work in parallel across multiple cores.
* Improves FPS from 30 to 55+ even for busy scenes with lots of mobile
enemies walking around.
* Before the level collision optimization, framerate would sometimes dip
to 30 FPS simply to move the player character on a completely blank
map!
* Add a Red Azulian as a test for mobile enemies.
* Its A.I. has it walk back and forth, changing directions when it
comes up against an obstacle for a few moments.
* It plays walking animations and can trigger collision events with
other Doodads, such as the Electric Door and Trapdoor.
* Move Gravity responsibility to the doodad scripts themselves.
* Call `Self.SetGravity(true)` to opt the Doodad in to gravity.
* The canvas.Loop() adds gravity to any doodad that has it enabled.
* Add animation support for Doodad actors (Play Mode) into the core
engine, so that the Doodad script can register named animations and
play them without managing all the details themselves.
* Doodad API functions on Self: AddAnimation, PlayAnimation,
StopAnimation, IsAnimating
* CLI: the `doodad convert` command will name each layer after the
filename used as the input image.
* CLI: fix the `doodad convert` command creating duplicate Palette
colors when converting a series of input images into a Doodad.
* CLI: fix the `doodad convert` command to share the same Palette when
converting each frame (layer) of a doodad so subsequent layers find
the correct color swatches for serialization.
* Scripting: add timers and intervals to Doodad scripts to allow them to
animate themselves or add delayed callbacks. The timers have the same
API as a web browser: setTimeout(), setInterval(), clearTimeout(),
clearInterval().
* Add support for uix.Actor to change its currently rendered layer in
the level. For example a Button Doodad can set its image to Layer 1
(pressed) when touched by the player, and Trapdoors can cycle through
their layers to animate opening and closing.
* Usage from a Doodad script: Self.ShowLayer(1)
* Default Doodads: added scripts for all Buttons, Doors, Keys and the
Trapdoor to run their various animations when touched (in the case of
Keys, destroy themselves when touched, because there is no player
inventory yet)
* Add the JavaScript system for Doodads to run their scripts in levels,
and wire initial OnCollide() handler support.
* CLI: Add a `doodad install-script` command to the doodad tool.
* Usage: `doodad install-script <index.js> <filename.doodad>`
* Add dev-assets folder for storing source files for the official
default doodads, sprites, levels, etc. and for now add a JavaScript
for the first test doodad.
* Move all collision code into the pkg/collision package.
* pkg/doodads/collision.go -> pkg/collision/collide_level.go
* pkg/doodads/collide_actors.go for new Actor collide support
* Add initial collision detection code between actors in Play Mode.
Fixes:
* Move the call to CollidesWithGrid() inside the Canvas instead of
outside in the PlayScene.movePlayer() so it can apply to all Actors
in motion.
* PlayScene.movePlayer() in turn just sets the player's Velocity so the
Canvas.Loop() can move the actor itself.
* When keeping the player inside the level boundaries: previously it was
assuming the player Position was relative to the window, and was
checking the WorldIndexAt and getting wrong results.
* Canvas scrolling (loopFollowActor): check that the actor is getting
close to the screen edge using the Viewport into the world, NOT the
screen-relative coordinates of the Canvas bounding boxes.
