Commit Graph

90 Commits

Author SHA1 Message Date
0e3a30e633 Fix Actor Collision Checks Again
* Recent collision update caused a regression where the player would get
  "stuck" while standing on top of a solid doodad, unable to walk left
  or right.
* When deciding if the actor is on top of a doodad, use the doodad's
  Hitbox (if available) instead of the bounding box. This fixes the
  upside-down trapdoor acting solid when landed on from the top, since
  its Hitbox Y coordinate is not the same as the top of its sprite.
* Cheats: when using the noclip cheat in Play Mode, you can hold down
  the Shift key while moving to only move one pixel at a time.
2020-01-02 22:05:49 -08:00
a43e45fad0 Level Collision and Scrolling Fixes
* Fix the level collision bug that allowed clipping thru a ceiling while
  climbing up a wall.
* Fix the scrolling behavior to keep the character on-screen no matter
  how fast the character is moving, especially downwards.
* Increase player speed and gravity.
* New cheat: "ghost mode" disables clipping for the player character.
* Mark an actor as "grounded" if they fall and are stopped by the lower
  level border, so they may jump again.
2020-01-02 20:23:27 -08:00
7b3aec0fef Fix Two-State Blocks & Collision Detection
* Two-state Buttons now also subscribe to the state change message, so
  other on/off buttons in the same level update to match the state of
  the button that was hit.
* Add lock mutexes around the scripting engine to protect from
  concurrent event handlers.
2020-01-02 17:58:22 -08:00
8965a7d86a Doodads: Crumbly Floor, Start Flag & State Blocks
Add new doodads:

* Start Flag: place this in a level to set the spawn point of the player
  character. If no flag is found, the player spawns at 0,0 in the top
  corner of the map. Only use one Start Flag per level, otherwise the
  player will randomly spawn at one of them.
* Crumbly Floor: a solid floor that begins to shake and then fall apart
  after a moment when a mobile character steps on it. The floor respawns
  after 5 seconds.
* State Blocks: blue and orange blocks that toggle between solid and
  pass-thru whenever a State Button is activated.
* State Button: a solid "ON/OFF" block that toggles State Blocks back
  and forth when touched. Only activates if touched on the side or bottom;
  acts as a solid floor when walked on from the top.

New features for doodad scripts:

* Actor scripts: call SetMobile(true) to mark an actor as a mobile mob
  (i.e. player character or enemy). Other doodads can check if the actor
  colliding with them IsMobile so they don't activate if placed too close
  to other (non-mobile) doodads in a level. The Blue and Red Azulians
  are the only mobile characters so far.
* Message.Broadcast allows sending a pub/sub message out to ALL doodads
  in the level, instead of only to linked doodads as Message.Publish does.
  This is used for the State Blocks to globally communicate on/off status
  without needing to link them all together manually.
2019-12-30 18:13:28 -08:00
0437adfbf8 Change types int32 -> int per upstream render and ui library 2019-12-27 19:16:34 -08:00
a060330450 Switch to external git.kirsle.net/go/ui package 2019-12-27 16:31:58 -08:00
ea0b41a781 Cut lib/render into its own package, change all imports 2019-12-22 18:21:58 -08:00
7355778a39 render: Refactor Events System to Make Module Standalone
* Refactor the events used in lib/render/sdl to be more general-purpose
  to make librender a stand-alone library separate from Doodle.
2019-12-22 14:11:01 -08:00
6af60f1128 Improve Collision Detection: More Active w/ Actors
* Improve the collision detection algorithm so that Actor OnCollide
  scripts get called more often WHILE an actor is moving, to prevent a
  fast-moving actor from zipping right through the "solid" hitbox and
  not giving the subject actor time to protest the movement.
* It's implemented by adding a `Settled` boolean to the OnCollide event
  object. When the game is testing out movement, Settled=false to give
  the actor a chance to say "I'm solid!" and have the moving party be
  stopped early.
* After all this is done, for any pair of actors still with overlapping
  hitboxes, OnCollide is called one last time with Settled=true. This is
  when the actor should run its actions (like publishing messages to
  other actors, changing state as in a trapdoor, etc.)
* The new collision detection algorithm works as follows:
  * Stage 1 is the same as before, all mobile actors are moved and
    tested against level geometry. They record their Original and New
    position during this phase.
  * Stage 2 is where we re-run that movement but ping actors being
    intersected each step of the way. We trace the steps between
    Original and New position, test OnCollide handler, and if it returns
    false we move the mobile actor to the Last Good Position along the
    trace.
  * Stage 3 we run the final OnCollide(Settled=true) to let actors run
    actions they wanted to for their collide handler, WITHOUT spamming
    those actions during Stage 2.
* This should now allow for tweaking of gravity speed and player speed
  without breaking all actor collision checking.
2019-07-16 21:07:38 -07:00
0c6c77a423 Lemon-shaped Ellipse Tool (WIP)
* Add initial Ellipse Tool to the Editor Mode. Currently there's
  something wrong with the algorithm and the ellipses have a sort of
  'lemon shape' to them.
* Refactor the IterLine/IterLine2 functions to be more consistent.
  IterLine used to be the raw algorithm that took a bunch of coordinate
  numbers and IterLine2 took two render.Point's and was the main one
  used throughout the app. Now, IterLine takes the two Points and the
  raw algorithm function removed.
2019-07-14 14:18:44 -07:00
cc1e441232 Eraser Tool, Brush Sizes
* Implement Brush Sizes for drawtool.Stroke and add a UI to the tools panel
  to control the brush size.
  * Brush sizes: 1, 2, 4, 8, 16, 24, 32, 48, 64
* Add the Eraser Tool to editor mode. It uses a default brush size of 16
  and a max size of 32 due to some performance issues.
* The Undo/Redo system now remembers the original color of pixels when
  you change them, so that Undo will set them back how they were instead
  of deleting the pixel entirely. Due to performance issues, this only
  happens when your Brush Size is 0 (drawing single-pixel shapes).
* UI: Add an IntVariable option to ui.Label to bind showing the value of
  an int reference.

Aforementioned performance issues:

* When we try to remember whole rects of pixels for drawing thick
  shapes, it requires a ton of scanning for each step of the shape. Even
  de-duplicating pixel checks, tons of extra reads are constantly
  checked.
* The Eraser is the only tool that absolutely needs to be able to
  remember wiped pixels AND have large brush sizes. The performance
  sucks and lags a bit if you erase a lot all at once, but it's a
  trade-off for now.
* So pixels aren't remembered when drawing lines in your level with
  thick brushes, so the Undo action will simply delete your pixels and not
  reset them. Only the Eraser can bring back pixels.
2019-07-11 19:07:46 -07:00
fd649b7ab1 Doodad CLI Tool Features; Write Lock and Hidden
* The `doodad` CLI tool got a lot of new commands:
  * `doodad show` to verbosely print details about Levels and Doodads.
  * `edit-level` and `edit-doodad` to update details about Levels and
    Doodads, such as their Title, Author, page type and size, etc.
* Doodads gain a `Hidden bool` that hides them from the palette in
  Editor Mode. The player character (Blue Azulian) is Hidden.
* Add some boolProps to the balance/ package and made a dynamic system
  to easily configure these with the in-game dev console.
  * Command: `boolProp list` returns available balance.boolProps
  * `boolProp <name>` returns the current value.
  * `boolProp <name> <true or false>` sets the value.
* The new boolProps are:
  * showAllDoodads: enable Hidden doodads on the palette UI (NOTE:
    reload the editor to take effect)
  * writeLockOverride: edit files that are write locked anyway
  * prettyJSON: pretty-format the JSON files saved by the game.
2019-07-06 23:28:11 -07:00
6476a67faf Make Fire Deadly
* Touching "fire" pixels in a level will pop up the End Level alert box
  saying you've died by fire and can restart the level.
* Update level.WriteFile() to prune broken links between actors before
  save. So when a linked actor is deleted, the leftover link data is
  cleaned up.
* Slight optimization in Canvas.drawStrokes: if either end of the stroke
  is not within view of the screen, don't show the stroke.
2019-07-06 20:31:50 -07:00
cb02feff1d Add Switches, Fire/Water Collision and Play Menu
* New doodads: Switches.
  * They come in four varieties: wall switch (background element, with
    "ON/OFF" text) and three side-profile switches for the floor, left
    or right walls.
  * On collision with the player, they flip their state from "OFF" to
    "ON" or vice versa. If the player walks away and then collides
    again, the switch flips again.
  * Can be used to open/close Electric Doors when turned on/off. Their
    default state is "off"
  * If a switch receives a power signal from another linked switch, it
    sets its own state to match. So, two "on/off" switches that are
    connected to a door AND to each other will both flip on/off when one
    of them flips.
* Update the Level Collision logic to support Decoration, Fire and Water
  pixel collisions.
  * Previously, ALL pixels in the level were acting as though solid.
  * Non-solid pixels don't count for collision detection, but their
    attributes (fire and water) are collected and returned.
* Updated the MenuScene to support loading a map file in Play Mode
  instead of Edit Mode. Updated the title screen menu to add a button
  for playing levels instead of editing them.
* Wrote some documentation.
2019-07-06 18:30:03 -07:00
a504658055 Centralized Tick Counter, Fix Actor Dragging Bug
* The game's tick counter was moved from Doodle.ticks to shmem.Tick
  where it is more easily available from every corner of the code.
* Fix a bug in the Level Editor where dragging an already-existing actor
  from one part of your map to another, would cause it to lose all its
  data (especially its UUID), breaking links to other doodads. Now the
  existing Actor catches a ride on the drag object to be reinserted
  later.
* Animate the Link Line visualizers between actors. They now animate a
  blinking color between magenta and grey-ish.
2019-07-05 16:04:36 -07:00
dc2695cfc9 Add More Trapdoor Doodads
* Add the other trapdoor directions: Left, Right and Up.
* UI: Show a color square in each Palette Swatch button in Edit Mode.
  * Instead of just the label like "solid", "fire", "decoration" it also
    shows a square box colored as the swatch color. The label and box
    are left-aligned in the button.
* Minor Play Mode physics update:
  * The player jump is now limited: they may only continue to move
    upwards for 20 ticks, after which they must touch ground before
    jumping again.
  * Remove the "press Down to move down" button. Only gravity moves you
    down.
* Fix a crash in the Editor Mode when you dragged doodads on top of each
  other. Source of bug was the loopActorCollision() function, which only
  should be useful to Play Mode, and it expected the scripting engine to
  be attached to the Canvas. In EditorMode there is no scripting engine.
2019-07-05 15:02:22 -07:00
5a1ec156ca Editor Mode: Line Tool and Rectangle Tool
* Add support for the LineTool and RectTool while in the EditorMode to
  easily draw straight lines and rectangle outlines.
* Key bindings were added to toggle tools in lieu of a proper UI to
  select the tool from a toolbar.
  * "F" for Pencil (Freehand) Tool (since "P" is for "Playtest")
  * "L" for Line Tool
  * "R" for Rectangle Tool
2019-07-03 17:19:25 -07:00
5d8c5510d8 Draw Lines Visualizing Doodad Links in Edit Mode
* If the current edit tool is Actor or Link, use the new drawtool.Stroke
  object to draw visual lines connecting every pair of linked actors in
  the level. The lines are hidden during normal editing and gameplay and
  only appear when you're possibly manipulating your actors and links.
2019-07-03 16:51:23 -07:00
c8620f871e Drawing Strokes and Undo/Redo Functionality
* Add new pkg/drawtool with utilities to abstract away drawing actions
  into Strokes and track undo/redo History for them.
* The freehand Pencil tool in EditorMode has been refactored to create a
  Stroke of Shape=Freehand and queue up its world pixels there instead
  of directly modifying the level chunker in real time. When the mouse
  button is released, the freehand Stroke is committed to the level
  chunker and added to the UndoHistory.
* UndoHistory is (temporarily) stored with the level.Level so it can
  survive trips to PlayScene and back, but is not stored as JSON on
  disk.
* Ctrl-Z and Ctrl-Y in EditorMode for undo and redo, respectively.
2019-07-03 16:25:23 -07:00
3d08291bc5 Demo Running Level as Title Screen Wallpaper
* Load SDL2 fonts from go-bindata storage so we don't have to ship
  external font files on disk.
* Dedupe names of doodads so we don't show double on the front-end
  (go-bindata bundled doodads + those on local filesystem)
* Use go-bindata for accessing wallpaper images.
* Better flashed messages walking you through the Link Tool.
* Stylize the title screen (MainScene) by rendering a live example level
  as the background wallpaper, with mobile doodads in motion.
2019-06-27 22:59:36 -07:00
48fc40ade4 Texture Caching for WASM Canvas Engine
* Add RGBA color blending support in WASM build.
* Initial texture caching API for Canvas renderer engine. The WASM build
  writes the chunk caches as a "data:image/png" base64 URL on the
  browser's sessionStorage, for access to copy into the Canvas.
* Separated the ClickEvent from the MouseEvent (motion) in the WASM
  event queue system, to allow clicking and dragging.
* Added the EscapeKey handler, which will abruptly terminate the WASM
  application, same as it kills the window in the desktop build.
* Optimization fix: I discovered that if the user clicks and holds over
  a single pixel when drawing a level, repeated Set() operations were
  firing meaning multiple cache invalidations. Not noticeable on PC but
  on WebAssembly it crippled the browser. Now if the cursor isn't moving
  it doesn't do anything.
2019-06-26 22:44:08 -07:00
af67b20d9b Initial WebAssembly Build Target
* Initial WebAssembly build target for Doodle in the wasm/ folder.
* Add a new render.Engine implementation, lib/render/canvas that uses
  the HTML 5 Canvas API instead of SDL2 for the WebAssembly target.
  * Ported the basic DrawLine(), DrawBox() etc. functions from SDL2 to
    Canvas context2d API.
  * Fonts are handled with CSS embedded fonts named after the font
    filename and defined in wasm/index.html
* `make wasm` builds the WASM program, and `make wasm-serve` runs a dev
  Go server that hosts the WASM file for development. The server also
  watches the dev tree for *.go files and rebuilds the WASM binary
  automatically on change.
* This build "basically" runs the game. UI and fonts all work and mouse
  movements and clicks are detected. No wallpaper support yet or texture
  caching (which will crash the game as soon as you click and draw a
  pixel in your map!)
2019-06-26 18:40:40 -07:00
4dd1bebc5f Add MenuScene with New Level UI
* Debug mode: no longer enables the DebugOverlay (F3) by default, but
  does now insert the current FPS counter into the window title bar.
* ui.Frame: set a default "mostly transparent" BG color so the frame
  background doesn't render as white.
* Add the MenuScene which will house the game's main menus.
* The "New Level" menu is first to be added.
  * UI lets you pick Page Type and Wallpaper using radio buttons.
  * Page Type: Unbounded, Bounded (default), No Negative Space, Bordered
  * Fix bugs in uix.Canvas to fully support all these page types.
2019-06-25 15:01:37 -07:00
87416f9740 Link Tool UX
* On the Doodads tab is the Link button to enter the Link Tool.
* Click Link, then click the 1st doodad on the level, then click the 2nd
  doodad to complete the link.
* The actors struct in the Level holds the link IDs for each actor.
2019-06-23 16:15:09 -07:00
567b3158f1 Minor Tweaks 2019-06-08 17:02:28 -07:00
1523deeb9c Return False: Solid Collision Between Actors
* Implement the handler code for `return false` when actors are
  colliding with each other and wish to act like solid walls.
* The locked doors will `return false` when they're closed and the
  colliding actor does not have the matching key.
* Add arbitrary key/value storage to Actors. The colored keys will set
  an actor value "key:%TITLE%" on the one who touched the key before
  destroying itself. The colored doors check that key when touched to
  decide whether to open.
* The trapdoor now only opens if you're touching it from the top (your
  overlap box Y value is 0), but if you touch it from below and the door
  is closed, it acts like a solid object.
2019-05-28 21:43:30 -07:00
a2e1bd1ccb Improve OnCollide Doodad Script Handling
* Events.OnCollide now receives a CollideEvent object, which makes
  available the .Actor who collided and the .Overlap rect which is
  zero-relative to the target actor. Doodad scripts can use the .Overlap
  to see WHERE in their own box the other actor has intruded.
  * Update the LockedDoor and ElectricDoor doodads to detect when the
    player has entered their inner rect (since their doors are narrower
    than their doodad size)
  * Update the Button doodads to only press in when the player actually
    touches them (because their sizes are shorter than their doodad
    height)
  * Update the Trapdoor to only trigger its animation when the board
    along its top has been touched, not when the empty space below was
    touched from the bottom.
* Events.OnLeave now implemented and fires when an actor who was
  previously intersecting your doodad has left.
* The engine detects when an event JS callback returns false.
  Eventually, the OnCollide can return false to signify the collision is
  not accepted and the actor should be bumped away as if they hit solid
  geometry.
2019-05-06 22:58:09 -07:00
61af068b80 Load Balance Collision and Actor Loop Across CPU Cores
* Add sync.WaitGroup to some parts of the level collision detection
  function and Canvas.Loop() to speed up the frame rate by load
  balancing some work in parallel across multiple cores.
* Improves FPS from 30 to 55+ even for busy scenes with lots of mobile
  enemies walking around.
* Before the level collision optimization, framerate would sometimes dip
  to 30 FPS simply to move the player character on a completely blank
  map!
2019-05-06 17:06:40 -07:00
d28745f89e Mobile Enemy Doodad Test
* Add a Red Azulian as a test for mobile enemies.
  * Its A.I. has it walk back and forth, changing directions when it
    comes up against an obstacle for a few moments.
  * It plays walking animations and can trigger collision events with
    other Doodads, such as the Electric Door and Trapdoor.
* Move Gravity responsibility to the doodad scripts themselves.
  * Call `Self.SetGravity(true)` to opt the Doodad in to gravity.
  * The canvas.Loop() adds gravity to any doodad that has it enabled.
2019-05-06 16:30:45 -07:00
a73dec9f31 Doodad Animations Managed In-Engine
* Add animation support for Doodad actors (Play Mode) into the core
  engine, so that the Doodad script can register named animations and
  play them without managing all the details themselves.
  * Doodad API functions on Self: AddAnimation, PlayAnimation,
    StopAnimation, IsAnimating
* CLI: the `doodad convert` command will name each layer after the
  filename used as the input image.
* CLI: fix the `doodad convert` command creating duplicate Palette
  colors when converting a series of input images into a Doodad.
2019-05-06 15:30:43 -07:00
ac490473b3 Load Doodads from System Path as well as User Path 2019-05-06 13:35:08 -07:00
d042457365 Use Azulian doodad as player character instead of empty dummy 2019-05-01 18:30:30 -07:00
52a2545692 Remove ScreenshotKey Event, Add F* Key Handlers
* The F3 key now toggles the Debug Overlay, which is now OFF by default.
* The F4 key now toggles the Debug Collision Boxes feature.
2019-04-19 16:21:04 -07:00
35d96b714d Add JavaScript panic catcher to doodads
* Add example mischievous doodad script that alters the logger date
  format and animates its canvas's mask color.
2019-04-18 22:02:59 -07:00
258b2eb285 Script Timers, Multiple Doodad Frames
* CLI: fix the `doodad convert` command to share the same Palette when
  converting each frame (layer) of a doodad so subsequent layers find
  the correct color swatches for serialization.
* Scripting: add timers and intervals to Doodad scripts to allow them to
  animate themselves or add delayed callbacks. The timers have the same
  API as a web browser: setTimeout(), setInterval(), clearTimeout(),
  clearInterval().
* Add support for uix.Actor to change its currently rendered layer in
  the level. For example a Button Doodad can set its image to Layer 1
  (pressed) when touched by the player, and Trapdoors can cycle through
  their layers to animate opening and closing.
  * Usage from a Doodad script: Self.ShowLayer(1)
* Default Doodads: added scripts for all Buttons, Doors, Keys and the
  Trapdoor to run their various animations when touched (in the case of
  Keys, destroy themselves when touched, because there is no player
  inventory yet)
2019-04-18 18:15:05 -07:00
1e80304061 Initial Doodad JavaScript System
* Add the JavaScript system for Doodads to run their scripts in levels,
  and wire initial OnCollide() handler support.
* CLI: Add a `doodad install-script` command to the doodad tool.
  * Usage: `doodad install-script <index.js> <filename.doodad>`
* Add dev-assets folder for storing source files for the official
  default doodads, sprites, levels, etc. and for now add a JavaScript
  for the first test doodad.
2019-04-15 23:07:40 -07:00
f8a83cbad9 Detect Collision Between Actors
* Move all collision code into the pkg/collision package.
  * pkg/doodads/collision.go -> pkg/collision/collide_level.go
  * pkg/doodads/collide_actors.go for new Actor collide support
* Add initial collision detection code between actors in Play Mode.
2019-04-15 19:17:25 -07:00
241186209c Play Mode: Fix Level Collision w/ Scrolling
Fixes:
* Move the call to CollidesWithGrid() inside the Canvas instead of
  outside in the PlayScene.movePlayer() so it can apply to all Actors
  in motion.
* PlayScene.movePlayer() in turn just sets the player's Velocity so the
  Canvas.Loop() can move the actor itself.
* When keeping the player inside the level boundaries: previously it was
  assuming the player Position was relative to the window, and was
  checking the WorldIndexAt and getting wrong results.
* Canvas scrolling (loopFollowActor): check that the actor is getting
  close to the screen edge using the Viewport into the world, NOT the
  screen-relative coordinates of the Canvas bounding boxes.
2019-04-14 15:25:03 -07:00
5c08577214 Port over code from old collision dev PR 2019-04-09 19:17:56 -07:00
2b42a072a0 Code Layout Refactor
* All private Doodle source code into the pkg/ folder.
* Potentially public code into the lib/ folder.
* Centralize the logger into a subpackage.
2019-04-09 17:35:44 -07:00