* For the doodad tool: skip the assets embed folder, the doodad binary doesn't
need to include all the game's doodads/levelpacks/etc. and can save on file
size.
* In `doodad resave`, .doodad files with Vacuum() and upgrade their chunker from
the MapAccessor to the RLEAccessor.
* Fix a rare concurrent map read/write error in OptimizeChunkerAccessors.
Levels can now be converted to RLE encoded chunk accessors and be re-saved
continuously without any loss of information.
Off-by-one errors resolved:
* The rle.NewGrid() was adding a +1 everywhere making the 2D grids have 129
elements to a side for a 128 chunk size.
* In rle.Decompress() the cursor value and translation to X,Y coordinates is
fixed to avoid a pixel going missing at the end of the first row (128,0)
* The abs.X-- hack in UnmarshalBinary is no longer needed to prevent the
chunks from scooting a pixel to the right on every save.
Doodad tool updates:
* Remove unused CLI flags in `doodad resave` (actors, chunks, script,
attachment, verbose) and add a `--output` flag to save to a different file
name to the original.
* Update `doodad show` to allow debugging of RLE compressed chunks:
* CLI flag `--chunk=1,2` to specify a single chunk coordinate to debug
* CLI flag `--visualize-rle` will Visualize() RLE compressed chunks in
their 2D grid form in your terminal window (VERY noisy for large
levels! Use the --chunk option to narrow to one chunk).
Bug fixes and misc changes:
* Chunk.Usage() to return a better percentage of chunk utilization.
* Chunker.ChunkFromZipfile() was split out into two functions:
* RawChunkFromZipfile retrieves the raw bytes of the chunk as well as the
file extension discovered (.bin or .json) so the caller can interpret
the bytes correctly.
* ChunkFromZipfile calls the former function and then depending on file
extension, unmarshals from binary or json.
* The Raw function enables the `doodad show` command to debug and visualize
the raw contents of the RLE compressed chunks.
* Updated the Visualize() function for the RLE encoder: instead of converting
palette indexes to hex (0-F) which would begin causing problems for palette
indexes above 16 (as they would use two+ characters), indexes are mapped to
a wider range of symbols (0-9A-Z) and roll over if you have more than 36
colors on your level. This at least keeps the Visualize() grid an easy to
read 128x128 characters in your terminal.
Finally add a second option for Chunk MapAccessor implementation besides the
MapAccessor. The RLEAccessor is basically a MapAccessor that will compress
your drawing with Run Length Encoding (RLE) in the on-disk format in the ZIP
file.
This slashes the file sizes of most levels:
* Shapeshifter: 21.8 MB -> 8.1 MB
* Jungle: 10.4 MB -> 4.1 MB
* Zoo: 2.8 MB -> 1.3 MB
Implementation details:
* The RLE binary format for Chunks is a stream of Uvarint pairs storing the
palette index number and the number of pixels to repeat it (along the Y,X
axis of the chunk).
* Null colors are represented by a Uvarint that decodes to 0xFFFF
or 65535 in decimal.
* Gameplay logic currently limits maps to 256 colors.
* The default for newly created chunks in-game will be RLE by default.
* Its in-memory representation is still a MapAccessor (a map of absolute
world coordinates to palette index).
* The game can still open and play legacy MapAccessor maps.
* On save in the editor, the game will upgrade/convert MapAccessor chunks over
to RLEAccessors, improving on your level's file size with a simple re-save.
Current Bugs
* On every re-save to RLE, one pixel is lost in the bottom-right corner of
each chunk. Each subsequent re-save loses one more pixel to the left, so what
starts as a single pixel per chunk slowly evolves into a horizontal line.
* Some pixels smear vertically as well.
* Off-by-negative-one errors when some chunks Iter() their pixels but compute
a relative coordinate of (-1,0)! Some mismatch between the stored world coords
of a pixel inside the chunk vs. the chunk's assigned coordinate by the Chunker:
certain combinations of chunk coord/abs coord.
To Do
* The `doodad touch` command should re-save existing levels to upgrade them.
* Update native.DefaultAuthor to get the name registered from the user's JWT
license in a way that avoids cyclic dependency errors.
* When plus_dpp.go#GetRegistration succeeds, it updates DefaultAuthor to the
registered name. The main.go now gets and prints the registered owner to
ensure this is populated on startup.
* Return correct ErrRegisteredFeature error when the FOSS version fails
to load embedded doodads.
* pkg/plus/dpp is the main plugin bridge, and defines nothing but an interface
that defines the Doodle++ surface area (referring to internal game types such
as doodad.Doodad or level.Level), but not their implementations.
* dpp.Driver (an interface) is the main API that other parts of the game will
call, for example "dpp.Driver.IsLevelSigned()"
* plus_dpp.go and plus_foss.go provide the dpp.Driver implementation for their
build; with plus_dpp.go generally forwarding function calls directly to the
proprietary dpp package and plus_foss.go generally returning false/errors.
* The bootstrap package simply assigns the above stub function to dpp.Driver
* pkg/plus/bootstrap is a package directly imported by main (in the doodle and
doodad programs) and it works around circular dependency issues: this package
simply assigns dpp.Driver to the DPP or FOSS version.
Miscellaneous fixes:
* File->Open in the editor and PlayScene will use the new Open Level window
instead of loading the legacy GotoLoadMenu scene.
* Deprecated legacy scenes: d.GotoLoadMenu() and d.GotoPlayMenu().
* The doodle-admin program depends on the private dpp package, so can not be
compiled in FOSS mode.
* Fix collision detection to allow actors to walk up slopes smoothly, without
losing any horizontal velocity.
* Fix scrolling a level canvas so that chunks near the right or bottom edge
of the viewpoint were getting culled prematurely.
* Centralize JavaScript exception catching logic to attach Go and JS stack
traces where possible to be more useful for debugging.
* Performance: flush all SDL2 textures from memory between scene transitions
in the app. Also add a `flush-textures` dev console command to flush the
textures at any time - they all should regenerate if still needed based on
underlying go.Images which can be garbage collected.
* Rework the Story Mode UI to display level thumbnails.
* Responsive UI: defaults to wide screen mode and shows 3 levels horizontally
but on narrow/mobile display, shows 2 levels per page in portrait.
* Add "Tiny" screenshot size (224x126) to fit the Story Mode UI.
* Make the pager buttons bigger and more touchable.
* Maximize the game window on startup unless the -w option with a specific
window resolution is provided.
Adds some support for "less giant" level screenshots.
* In the Editor, the Level->Take Screenshot menu will render a cropped screen
shot of just the level viewport on screen. Note: it is not an SDL2 screen
copy but generated from scratch from the level data.
* In levels themselves, screenshots can be stored inside the level data in
three different sizes: large (1280x720), medium and small (each a halved
size of the previous).
* The first screenshot is created when the level is saved, starting from
wherever the scroll position in the editor is at, and recording the 720p
view of the level from there.
* The level screenshot can be previewed and updated in the Level Properties
window of the editor: so you can scroll the editor to just the right position
and take a good screenshot to represent your level.
* In the future: these embedded level screenshots will be displayed on the
Story Mode and other screens to see a preview of each level.
Other tweaks:
* When taking a Giant Screenshot: a confirm modal will warn the player that
it may take a while. And during the screenshot, show the new Wait Modal to
block player interaction until the screenshot has finished.
Updates the savegame.json file format:
* Levels now have a UUID value assigned at first save.
* The savegame.json will now track level completion/score based on UUID,
making it robust to filename changes in either levels or levelpacks.
* The savegame file is auto-migrated on startup - for any levels not
found or have no UUID, no change is made, it's backwards compatible.
* Level Properties window adds an "Advanced" tab to show/re-roll UUID.
New JavaScript API for doodad scripts:
* `Actors.CameraFollowPlayer()` tells the camera to return focus to the
player character. Useful for "cutscene" doodads that freeze the player,
call `Self.CameraFollowMe()` and do a thing before unfreezing and sending the
camera back to the player. (Or it will follow them at their next directional
input control).
* `Self.MoveBy(Point(x, y int))` to move the current actor a bit.
New option for the `doodad` command-line tool:
* `doodad resave <.level or .doodad>` will load and re-save a drawing, to
migrate it to the newest file format versions.
Small tweaks:
* On bounded levels, allow the camera to still follow the player if the player
finds themselves WELL far out of bounds (40 pixels margin). So on bounded
levels you can create "interior rooms" out-of-bounds to Warp Door into.
* New wallpaper: "Atmosphere" has a black starscape pattern that fades into a
solid blue atmosphere.
* Camera strictly follows the player the first 20 ticks, not 60 of level start
* If player is frozen, directional inputs do not take the camera focus back.
Add the ability for the free version of the game to allow loading levels that
use embedded custom doodads if those levels are signed.
* Uses the same signing keys as the JWT token for license registrations.
* Levels and Levelpacks can both be signed. So individual levels with embedded
doodads can work in free versions of the game.
* Levelpacks now support embedded doodads properly: the individual levels in
the pack don't need to embed a custom doodad, but if the doodad exists in
the levelpack's doodads/ folder it will load from there instead - for full
versions of the game OR when the levelpack is signed.
Signatures are computed by getting a listing of embedded assets inside the
zipfile (the assets/ folder in levels, and the doodads/ + levels/ folders
in levelpacks). Thus for individual signed levels, the level geometry and
metadata may be changed without breaking the signature but if custom doodads
are changed the signature will break.
The doodle-admin command adds subcommands to `sign-level` and `verify-level`
to manage signatures on levels and levelpacks.
When using the `doodad levelpack create` command, any custom doodads the
levels mention that are found in your profile directory get embedded into
the zipfile by default (with --doodads custom).
* Fix display bug with rectangular doodads scrolling off screen.
* The default Author of new files will be your registration name, if available
before using your $USER name.
Convert the Chunker size to a uint8 so chunk sizes are limited to 255px. This
means that inside of a chunk, uint8's can track the relative pixel coordinates
and result in a great memory savings since all of these uint8's are currently
64-bits wide apiece.
WIP on rectangular shaped doodads:
* You can create such a doodad in the editor and draw it normally.
* It doesn't draw the right size when dragged into your level however:
- In uix.Actor.Size() it gets a rect of the doodad's square Chunker size,
instead of getting the proper doodad.Size rect.
- If you give it the doodad.Size rect, it draws the Canvas size correctly
instead of a square - the full drawing appears and in gameplay its hitbox
(assuming the same large rectangle size) works correctly in-game.
- But, the doodad has scrolling issues when it gets to the top or left edge
of the screen! This old gnarly bug has come back. For some reason square
canvas doodads draw correctly but rectangular ones have the drawing scroll
just a bit - how far it scrolls is proportional to how big the doodad is,
with the Start Flag only scrolling a few pixels before it stops.
* Add new pixel attributes: SemiSolid and Slippery (the latter is WIP)
* SemiSolid pixels are only solid below the player character. You can walk on
them and up and down SemiSolid slopes, but can freely pass through from the
sides or jump through from below.
* Update the Palette Editor UI to replace the Attributes buttons: instead of
text labels they now have smaller icons (w/ tooltips) for the Solid,
SemiSolid, Fire, Water and Slippery attributes.
* Bugfix in Palette Editor: use cropped (24x24) images for the Tex buttons so
that the large Bubbles texture stays within its designated space!
* uix.Actor.SetGrounded() to also set the Y velocity to zero when an actor
becomes grounded. This fixes a minor bug where the player's Y velocity (due
to gravity) was not updated while they were grounded, which may eventually
become useful to allow them to jump down thru a SemiSolid floor. Warp Doors
needed a fix to work around the bug, to set the player's Grounded(false) or
else they would hover a few pixels above the ground at their destination,
since Grounded status paused gravity calculations.
* Add "Options" support for Doodads: these allow for individual Actor instances
on your level to customize properties about the doodad. They're like "Tags"
except the player can customize them on a per-actor basis.
* Doodad Editor: you can specify the Options in the Doodad Properties window.
* Level Editor: when the Actor Tool is selected, on mouse-over of an actor,
clicking on the gear icon will open a new "Actor Properties" window which
shows metadata (title, author, ID, position) and an Options tab to configure
the actor's options.
Updates to the scripting API:
* Self.Options() returns a list of option names defined on the Doodad.
* Self.GetOption(name) returns the value for the named option, or nil if
neither the actor nor its doodad have the option defined. The return type
will be correctly a string, boolean or integer type.
Updates to the doodad command-line tool:
* `doodad show` will print the Options on a .doodad file and, when showing a
.level file with --actors, prints any customized Options with the actors.
* `doodad edit-doodad` adds a --option parameter to define options.
Options added to the game's built-in doodads:
* Warp Doors: "locked (exit only)" will make it so the door can not be opened
by the player, giving the "locked" message (as if it had no linked door),
but the player may still exit from the door if sent by another warp door.
* Electric Door & Electric Trapdoor: "opened" can make the door be opened by
default when the level begins instead of closed. A switch or a button that
removes power will close the door as normal.
* Colored Doors & Small Key Door: "unlocked" will make the door unlocked at
level start, not requiring a key to open it.
* Colored Keys & Small Key: "has gravity" will make the key subject to gravity
and set its Mobile flag so that if it falls onto a button, it will activate.
* Gemstones: they had gravity by default; you can now uncheck "has gravity" to
remove their Gravity and IsMobile status.
* Gemstone Totems: "has gemstone" will set the totem to its unlocked status by
default with the gemstone inserted. No power signal will be emitted; it is
cosmetic only.
* Fire Region: "name" can let you set a name for the fire region similarly to
names for fire pixels: "Watch out for ${name}!"
* Invisible Warp Door: "locked (exit only)" added as well.
* On the failure (but still success) dialog on Survival Mode levels
(e.g. Azulian Tag): make the default be to retry the level but
show a "pity" Next Level button below, as the level is marked as
completed (silver score) and the next one is unlocked.
Previously: the Chunker tracks with chunks were gotten during the
current game tick and the N-1 and N-2 ticks, and chunks not accessed in
two ticks were freed immediately.
Now: they go into a "garbage collection" pool with a minimum number of
game ticks to free. So if they're needed again, they're saved from the
gc pool. F3 overlay data shows the count of the gc pool.
Water pixels finally do something other than turn your character blue!
* When the player character is "wet" (touching water pixels, and so appearing in
a blue mask), water physics apply: gravity is slower, your jump height is
halved, but you get infinite jumps to swim higher in the water.
* Holding the jump key under water will incur a short delay between jumps, so
that you don't just fly straight up to the surface. Tap the jump button to
move up quicker, you can spam it all you want.
Azulians are also able to handle being under water:
* They'll sink to the bottom and keep walking back and forth normally.
* If you are above them and noticed, they'll jump (swim) up towards you,
aware of the water and it jumps like you do.
* The Blue Azulian has the poorest vertical aggro range so it isn't a
very good swimmer. The White Azulian is very good at navigating water
as it can pursue the player from the furthest distance of them all.
Changes to the editor:
* New brush pattern added: bubbles.png
* It's the default pattern now for the "water" color of all
of the built-in palettes instead of ink.png
* A repeating pattern of bubbles carved out showing the
level wallpaper.
* The old "Bubbles (circles.png)" is renamed "Circles"
* The last scroll position is saved with the Level file, so when you reload
the level later it's scrolled at where you left it.
* New built-in wallpaper: "Dotted paper (dark)" is a dark-themed wallpaper.
* New built-in palette: "Neon Bright" with bright colors for dark levels.
* New cheat: "warp whistle" to automatically win the level.
* In case the user has a VERY LARGE screen resolution bigger than the full
bounds of a Bounded level, the Play Scene will cap the size and center
the level canvas onto the window. This is preferable to being able to see
beyond the level's boundaries and hitting an invisible wall in-game.
* Make the titlescreen Lazy Scroll work on unbounded levels. It can't bounce
off scroll boundaries but it will reverse course if it reaches the level's
furthest limits.
* Bugfix: characters' white eyes were transparent in-game. Multiple culprits
from the `doodad convert` tool defaulting the chroma key to white, to the
SDL2 textures considering white to be transparent. For the latter, the game
offsets the color by -1 blue.
* Editor: Auto-save on a background goroutine so you don't randomly freeze
the editor up during.
* Fix actor linking issues when you drag and re-place a linked doodad: the
level was too eagerly calling PruneLinks() whenever a doodad was 'destroyed'
(such as the one just picked up) breaking half of the link connection.
* Chunk unloader: do not unload a chunk that has been modified (Set or Delete
called on), keep them in memory until the next ZIP file save to flush them
out to disk.
* Link Tool: if you clicked an actor and don't want to connect a link, click
the first actor again to de-select it.
Updates to the `doodad` tool:
* `doodad edit-level --resize <int>` can re-chunk a level to use a different
chunk size than the default 128. Large chunk sizes 512+ lead to performance
problems.
Adds several new doodads to the game and 5 new wallpapers (parchment
paper in blue, green, red, white and yellow).
New doodads:
* Crusher: A purple block-headed mob wearing an iron helmet. It tries
to crush the player when you get underneath. Its flat helmet can be
ridden on like an elevator back up.
* Snake: A green stationary mob that always faces toward the player.
If the player is nearby and jumps, the Snake will jump too and hope
to catch the player in mid-air.
* Gems and Totems: A new key & lock collectible. Gems have quantity so
you can collect multiple, and place them into matching Totems. A
Totem gives off a power signal when its gem is placed and all other
Totems it is linked to have also been activated. A single Totem may
link to an Electric Door and require only one gem to open it, or it
can link to other Totems and they all require gems before the power
signal is sent out.
* The blue bird follows the same base AI as the red bird (it has a
target altitude that it tries to maintain, and it will dive at the
player) but the blue bird flies in a sine wave pattern around its
target altitude. It also has a longer scan radius to search for the
player than the red bird.
* The sine wave pattern of the blue bird means you may fly under its
radar depending how high it is on average.
Cheat codes that replace the player character are refactored to make
it easier to extend, and new cheats have been added:
* super azulian: play as the Red Azulian.
* hyper azulian: play as the White Azulian.
* bluebird: play as the new Bird (blue).
* The level.FileSystem type has updated to support ZIP files too.
* Legacy levels loaded from gz/json have their old FileSystem as a
simple map[filename]data and this parses from JSON OK.
* On save to zip, the legacy loaded file data gets exported to ZIP.
* Going forward: newly added or deleted files during runtime are kept in
the legacy file map until the next save when the filemap is again
flushed out to ZIP.
* For regular read-access, the FileSystem reads from the ZIP file if the
data is not in the hot map (legacy file or recently modified
attachment).
* Bugfix: be sure to Inflate() the Level/Doodad after loading from
zipfile - it used to be that directly after a save, trying to play the
level failed because the Level.Actors struct was missing their IDs,
and similarly recently written chunks would error out (become black
voids) on levels/doodads so we Inflate() both after save/replacing
their zip handle.
Especially to further optimize memory for large levels, Levels and
Doodads can now read and write to a ZIP file format on disk with
chunks in external files within the zip.
Existing doodads and levels can still load as normal, and will be
converted into ZIP files on the next save:
* The Chunker.ChunkMap which used to hold ALL chunks in the main json/gz
file, now becomes the cache of "hot chunks" loaded from ZIP. If there is
a ZIP file, chunks not accessed recently are flushed from the ChunkMap
to save on memory.
* During save, the ChunkMap is flushed to ZIP along with any non-loaded
chunks from a previous zipfile. So legacy levels "just work" when
saving, and levels loaded FROM Zip will manage their ChunkMap hot
memory more carefully.
Memory savings observed on "Azulian Tag - Forest.level":
* Before: 1716 MB was loaded from the old level format into RAM along
with a slow load screen.
* After: only 243 MB memory was used by the game and it loaded with
a VERY FAST load screen.
Updates to the F3 Debug Overlay:
* "Chunks: 20 in 45 out 20 cached" shows the count of chunks inside the
viewport (having bitmaps and textures loaded) vs. chunks outside which
have their textures freed (but data kept), and the number of chunks
currently hot cached in the ChunkMap.
The `doodad` tool has new commands to "touch" your existing levels
and doodads, to upgrade them to the new format (or you can simply
open and re-save them in-game):
doodad edit-level --touch ./example.level
doodad edit-doodad --touch ./example.doodad
The output from that and `doodad show` should say "File format: zipfile"
in the headers section.
To do:
* File attachments should also go in as ZIP files, e.g. wallpapers
Instead of the loadscreen eager-loading ALL level chunks to Go Images, only
load the chunks within the "LoadingViewport" - which is the on-screen
Viewport plus a margin of chunks off the screen edges.
During gameplay, every few ticks, reevaluate which chunks are inside or
outside the LoadingViewport; for chunks outside, free their SDL2 textures
and free their cached bitmaps to keep overall memory usage down. The
AzulianTag-Forest level now stays under 200 Textures at any given time
and the loadscreen goes faster as it doesn't have to load every chunk's
images up front.
The LoadUnloadChunk feature can be turned on/off with feature flags. If
disabled the old behavior is restored: loadscreen loads all images and
the LoadUnloadChunks function is not run.
Other changes:
* loadscreen: do not free textures in the Hide() function as this runs on
a different goroutine and may break. The 4 wallpaper textures are OK
to keep in memory anyway, the loadscreen is reused often!
* Free more leaked textures: on the Inventory frame and when an actor
calls Self.Destroy()
* Stop leaking goroutines in the PubSub feature of the doodad script
engine; scripting.Supervisor.Teardown() sends a stop signal to all
scripts to clean up neatly. Canvas.Destroy() tears down its scripting
supervisor automatically.
* Added to the F3 Debug Overlay is a "Texture:" label that counts the number
of textures currently loaded by the (SDL2) render engine.
* Added Teardown() functions to Level, Doodad and the Chunker they both use
to free up SDL2 textures for all their cached graphics.
* The Canvas.Destroy() function now cleans up all textures that the Canvas
is responsible for: calling the Teardown() of the Level or Doodad, calling
Destroy() on all level actors, and cleaning up Wallpaper textures.
* The Destroy() method of the game's various Scenes will properly Destroy()
their canvases to clean up when transitioning to another scene. The
MainScene, MenuScene, EditorScene and PlayScene.
* Fix the sprites package to actually cache the ui.Image widgets. The game
has very few sprites so no need to free them just yet.
Some tricky places that were leaking textures have been cleaned up:
* Canvas.InstallActors() destroys the canvases of existing actors before it
reinitializes the list and installs the replacements.
* The DraggableActor when the user is dragging an actor around their level
cleans up the blueprint masked drag/drop actor before nulling it out.
Misc changes:
* The player character cheats during Play Mode will immediately swap out the
player character on the current level.
* Properly call the Close() function instead of Hide() to dismiss popup
windows. The Close() function itself calls Hide() but also triggers
WindowClose event handlers. The Doodad Dropper subscribes to its close
event to free textures for all its doodad canvases.
New features:
* Flood Tool for the editor. It replaces pixels of one color with another,
contiguously. Has limits on how far from the original pixel it will color,
to avoid infinite loops in case the user clicked on wide open void. The
limit when clicking an existing color is 1200px or only a 600px limit if
clicking into the void.
* Cheat code: 'master key' to play locked Story Mode levels.
Level GameRules feature added:
* A new tab in the Level Properties dialog
* Difficulty has been moved to this tab
* Survival Mode: for silver high score, longest time alive is better than
fastest time, for Azulian Tag maps. Gold high score is still based on
fastest time - find the hidden level exit without dying!
Tweaks to the Azulians' jump heights:
* Blue Azulian: 12 -> 14
* Red Azulian: 14 -> 18
* White Azulian: 16 -> 20
Bugs fixed:
* When editing your Palette to rename a color or add a new color, it wasn't
possible to draw with that color until the editor was completely unloaded
and reloaded; this is now fixed.
* Minor bugfix in Difficulty.String() for Peaceful (-1) difficulty to avoid
a negative array index.
* Try and prevent user giving the same name to multiple swatches on their
palette. Replacing the whole palette can let duplication through still.
Added a new level property: Difficulty
* An enum ranging from -1, 0, 1 (Peaceful, Normal, Hard)
* Default difficulty is Normal; pre-existing levels are Normal by
default per the zero value.
Doodad scripts can read the difficulty via the new global variable
`Level.Difficulty` and some doodads have been updated:
* Azulians: on Peaceful they ignore all player characters, and on Hard
they are in "hunt mode": infinite aggro radius and they're aggressive
to all characters.
* Bird: on Peaceful they will not dive and attack any player character.
Other spit and polish:
* New Level/Level Properties UI reworked into a magicform.
* New "PromptPre(question, answer, func)" function for prompting the
user with the developer shell, but pre-filling in an answer for them
to either post or edit.
* magicform has a PromptUser field option for simple Text/Int fields
which present as buttons, so magicform can prompt and update the
variable itself.
* Don't show the _autosave.doodad in the Doodad Dropper window.
* magicform is a helper package that may eventually be part of the go/ui
library, for easily creating structured form layouts.
* The Level Publisher UI is the first to utilize magicform.
Refactor how level publishing works:
* Level data now stores SaveDoodads and SaveBuiltins (bools) and when
the level editor saves the file, it will attach custom and/or builtin
doodads just before save.
* Move the menu item from the File menu to Level->Publish
* The Publisher UI just shows the checkboxes to toggle the level
settings and a convenient Save button along with descriptive text.
* Free versions get the "Register" window popping up if they click the
Save Now button from within the publisher window.
Note: free versions can still toggle the booleans on/off but their game
will not attach any new doodads on save.
* Free games which open a level w/ embedded doodads will get a pop-up
warning that the doodads aren't available.
* If they DON'T turn off the SaveDoodads option, they can still edit and
save the level and keep the existing doodads attached.
* If they UNCHECK the option and save, all attached doodads are removed
from the level.
* Clean up unused msgpack code for levels and doodads
* Fix the cosmetic bug where actors in your level would display wrongly
when scrolling off the top/left edges of the screen: they used to
anchor at their own 0,0 coordinate and crop their width/height leading
to a 'scrolling' effect that didn't happen on the right/bottom edges.
- Fix a memory sharing bug in the Giant Screenshot feature.
- Main Menu to eagerload chunks in the background to make scrolling less
jittery. No time for a loadscreen!
- Extra script debugging: names/IDs of doodads are shown when they send
messages to one another.
- Level Properties: you can edit the Bounded max width/height values for
the level.
Doodad changes:
- Buttons: fix a timing bug and keep better track of who is stepping on it,
only popping up when all colliders have left. The effect: they pop up
immediately (not after 200ms) and are more reliable.
- Keys: zero-qty keys will no longer put themselves into the inventory of
characters who already have one except for the player character. So
the Thief will not steal them if she already has the key.
Added to the JavaScript API:
* time.Hour, time.Minute, time.Second, time.Millisecond, time.Microsecond
* The "Giant Screenshot" feature takes a very long time, so it is made
asynchronous. If you try and run a second one while the first is busy,
you get an error flash. You can continue editing the level, even
playtest it, or load a different level, and it will continue crunching
on the Giant Screenshot and flash when it's finished.
* Updated the player physics to use proper Velocity to jump off the
ground rather than the hacky timer-based fixed speed approach.
* FlashError() function to flash "error level" messages to the screen.
They appear in orange text instead of the usual blue, and most error
messages in the game use this now. The dev console "error <msg>"
command can simulate an error message.
* Flashed message fonts are updated. The blue font now uses softer
stroke and shadow colors and the same algorithm applies to the orange
error flashes.
Some other changes to player physics:
* Max velocity, acceleration speed, and gravity have been tweaked.
* Fast turn-around if you are moving right and then need to go left.
Your velocity resets to zero at the transition so you quickly get
going the way you want to go.
Some levels that need a bit of love for the new platforming physics:
* Tutorial 3.level
In the Level Editor, the "Level->Giant Screenshot" menu will take a full
scale PNG screenshot of the entire level, with its wallpaper and
doodads, and save it in ~/.config/doodle/screenshots.
It is currently CPU intensive and slow. With future work it should be
made asynchronous. The function is abstracted away nicely so that the
doodad CLI tool may support this as well.
Improvements to the Zoom feature:
* Actor position and size within your level scales up and down
appropriately. The canvas size of the actor is scaled and its canvas
is told the Zoom number of the parent so it will render its own
graphic scaled correctly too.
Other features:
* "Experimental" tab added to the Settings window as a UI version of the
--experimental CLI option. The option saves persistently to disk.
* The "Replace Palette" experimental feature now works better. Debating
whether it's a useful feature to even have.
* New Doodad: Checkpoint Flag. They update the player's spawn point
whenever the player passes one. The most recently activated
checkpoint is rendered brighter than the others.
* End Level Modal: the fake alert box window drawn by the Play Mode
is replaced with a fancy modal widget (similar to Alert and Confirm).
It handles level victory or failure conditions and can show or hide
all the buttons as needed.
* Gameplay: There is a "Retry from Checkpoint" option added, which
appears in the level failure modal. It will teleport you back to
the Start Flag or the last Checkpoint Flag you had touched, without
resetting the level -- your keys, unlocked doors, etc. will be
preserved so you can retry.
* Set a maximum speed on the "Camera Follows Actor" logic of 64
pixels per tick. This results in a smoother scrolling transition
when the player jumps to a new location on the map, such as by
a Warp Door.
* Update the default color palettes:
* All: Add a "hint" magenta color.
* Colored Pencil: Add a "darkstone" solid color.
Updates to the Doodads JavaScript API:
* SetCheckpoint(Point(x, y)): set the player character's spawn
position. Giving it Self.Position() is an easy way to set the
player spawn to your doodad's location.
New feature: link a Start Flag to another doodad in your level
and you will play as that doodad instead of Boy. All Creatures
are designed to be playable. Playing as "other" doodads leads
to interesting effects, like not being able to activate buttons,
switches, or warp doors and not having an inventory to pick up
keys. The Anvil is fun: it can destroy other mobile doodads by
jumping on them.
If the actor does not specify that it has gravity, the gameplay
starts in antigravity mode. This will be the vast majority of
non-mobile doodads and the Bird.
Other changes:
* The Blue and Red Azulians now share a doodad script.
* The Azulians AI is still to walk back and forth, pickup keys and
press buttons. The Blue Azulian walks slower than the red one.
* The Blue Azulian is no longer hidden from the doodads list.
* Actor UUID values in levels are now V1 UUIDs (time-ordered).
This will help to reliably resolve conflicts in draw order
of overlapping doodads (newest added to level wins).
* Link Tool: clicking on a pair of already-linked doodads will
now unlink them, so you don't have to delete one to delete
the link.
* Actor Tool: deleting an actor immediately calls PruneLinks()
to clean up any links that the deleted doodad might have.
* pkg/loadscreen implements a global Loading Screen for loading heavy
levels for playing or editing.
* All chunks in a level are pre-rendered to bitmap before gameplay
begins, which reduces stutter as chunks were being lazily rendered on
first appearance before.
* The loading screen can be played with in the developer console:
$ loadscreen.Show()
$ loadscreen.Hide()
Along with ShowWithProgress(), SetProgress(float64) and IsActive()
* Chunker: separate the concerns between Bitmaps an (SDL2) Textures.
* Chunker.Prerender() converts a chunk to a bitmap (a Go image.Image)
and caches it, only re-rendering if marked as dirty.
* Chunker.Texture() will use the pre-cached bitmap if available to
immediately produce the SDL2 texture.
Other miscellaneous changes:
* Added to the Colored Pencil palette: Sandstone
* Added "perlin noise" brush pattern
Note: this commit introduces instability and crashes:
* New `asyncSetup()` functions run on a goroutine, but SDL2 texture
calls must run on the main thread.
* Chunker avoids this by caching bitmaps, not textures.
* Wallpaper though is unstable, sometimes works, sometimes has graphical
glitches, sometimes crashes the game.
* Wallpaper.Load() and the *Texture() functions are where it crashes.
* Levels and Doodad files will be written in gzip-compressed JSON format
* `boolProp compress-drawings false` to disable compression and save as
classic JSON format directly
* The game can still read uncompressed JSON files
The file size savings on some built-in assets:
* Tutorial 2.level: 2.2M -> 414K (82% smaller)
* warp-door-orange.doodad: 105K -> 17K (84% smaller)
* Migrate off go-bindata to embed built-in fonts, levels and doodads in
favor of Go 1.16 native embed functionality.
* `make bindata` prints a deprecation warning to not break older build
scripts
* Removes all references of bindata from the program
* The pattern textures for level palettes have been brightened and work
better with bright colors.
* The three default palettes for new levels now have patterns applied to
each of their colors.
* Bugfix around resetting keybind states for Zoom In/Out, Scroll to
Origin and Reset Zoom Level bindings.
