Commit Graph

24 Commits

Author SHA1 Message Date
0e3a30e633 Fix Actor Collision Checks Again
* Recent collision update caused a regression where the player would get
  "stuck" while standing on top of a solid doodad, unable to walk left
  or right.
* When deciding if the actor is on top of a doodad, use the doodad's
  Hitbox (if available) instead of the bounding box. This fixes the
  upside-down trapdoor acting solid when landed on from the top, since
  its Hitbox Y coordinate is not the same as the top of its sprite.
* Cheats: when using the noclip cheat in Play Mode, you can hold down
  the Shift key while moving to only move one pixel at a time.
2020-01-02 22:05:49 -08:00
7b3aec0fef Fix Two-State Blocks & Collision Detection
* Two-state Buttons now also subscribe to the state change message, so
  other on/off buttons in the same level update to match the state of
  the button that was hit.
* Add lock mutexes around the scripting engine to protect from
  concurrent event handlers.
2020-01-02 17:58:22 -08:00
8965a7d86a Doodads: Crumbly Floor, Start Flag & State Blocks
Add new doodads:

* Start Flag: place this in a level to set the spawn point of the player
  character. If no flag is found, the player spawns at 0,0 in the top
  corner of the map. Only use one Start Flag per level, otherwise the
  player will randomly spawn at one of them.
* Crumbly Floor: a solid floor that begins to shake and then fall apart
  after a moment when a mobile character steps on it. The floor respawns
  after 5 seconds.
* State Blocks: blue and orange blocks that toggle between solid and
  pass-thru whenever a State Button is activated.
* State Button: a solid "ON/OFF" block that toggles State Blocks back
  and forth when touched. Only activates if touched on the side or bottom;
  acts as a solid floor when walked on from the top.

New features for doodad scripts:

* Actor scripts: call SetMobile(true) to mark an actor as a mobile mob
  (i.e. player character or enemy). Other doodads can check if the actor
  colliding with them IsMobile so they don't activate if placed too close
  to other (non-mobile) doodads in a level. The Blue and Red Azulians
  are the only mobile characters so far.
* Message.Broadcast allows sending a pub/sub message out to ALL doodads
  in the level, instead of only to linked doodads as Message.Publish does.
  This is used for the State Blocks to globally communicate on/off status
  without needing to link them all together manually.
2019-12-30 18:13:28 -08:00
ea0b41a781 Cut lib/render into its own package, change all imports 2019-12-22 18:21:58 -08:00
65a811db0d Auto-prune Empty Chunks in Level Files
* Discovered a bug where if you hit the Undo key to erase pixels and an
  entire chunk became empty by it, the chunk would have rendering errors
  and show as a solid black square instead of the level wallpaper
  showing through.
* Chunks that have no pixels in them are culled from the chunker
  immediately when you call a Delete() operation.
* The level file saver also calls a maintenance function to prune all
  empty chunks upon saving the file. So existing levels with broken
  chunks need only be re-saved to fix them.
2019-07-16 22:10:18 -07:00
6af60f1128 Improve Collision Detection: More Active w/ Actors
* Improve the collision detection algorithm so that Actor OnCollide
  scripts get called more often WHILE an actor is moving, to prevent a
  fast-moving actor from zipping right through the "solid" hitbox and
  not giving the subject actor time to protest the movement.
* It's implemented by adding a `Settled` boolean to the OnCollide event
  object. When the game is testing out movement, Settled=false to give
  the actor a chance to say "I'm solid!" and have the moving party be
  stopped early.
* After all this is done, for any pair of actors still with overlapping
  hitboxes, OnCollide is called one last time with Settled=true. This is
  when the actor should run its actions (like publishing messages to
  other actors, changing state as in a trapdoor, etc.)
* The new collision detection algorithm works as follows:
  * Stage 1 is the same as before, all mobile actors are moved and
    tested against level geometry. They record their Original and New
    position during this phase.
  * Stage 2 is where we re-run that movement but ping actors being
    intersected each step of the way. We trace the steps between
    Original and New position, test OnCollide handler, and if it returns
    false we move the mobile actor to the Last Good Position along the
    trace.
  * Stage 3 we run the final OnCollide(Settled=true) to let actors run
    actions they wanted to for their collide handler, WITHOUT spamming
    those actions during Stage 2.
* This should now allow for tweaking of gravity speed and player speed
  without breaking all actor collision checking.
2019-07-16 21:07:38 -07:00
0126c288b2 Minor Build Script Updates, Mac OS Support
* Update the Makefile to choose MacOS friendly `date` formats.
* Build the Windows doodle.exe binary as a GUI application to skip the
  console window.
* Added Mac OS build instructions.
2019-07-08 18:16:45 -07:00
154fc6c9cb Update Doodad build-scripts to tag extra data
* The Blue Azulian marks its doodad file as Hidden.
* All Doodads are write locked after generation and tagged with common
  author value.
2019-07-06 23:50:38 -07:00
cb02feff1d Add Switches, Fire/Water Collision and Play Menu
* New doodads: Switches.
  * They come in four varieties: wall switch (background element, with
    "ON/OFF" text) and three side-profile switches for the floor, left
    or right walls.
  * On collision with the player, they flip their state from "OFF" to
    "ON" or vice versa. If the player walks away and then collides
    again, the switch flips again.
  * Can be used to open/close Electric Doors when turned on/off. Their
    default state is "off"
  * If a switch receives a power signal from another linked switch, it
    sets its own state to match. So, two "on/off" switches that are
    connected to a door AND to each other will both flip on/off when one
    of them flips.
* Update the Level Collision logic to support Decoration, Fire and Water
  pixel collisions.
  * Previously, ALL pixels in the level were acting as though solid.
  * Non-solid pixels don't count for collision detection, but their
    attributes (fire and water) are collected and returned.
* Updated the MenuScene to support loading a map file in Play Mode
  instead of Edit Mode. Updated the title screen menu to add a button
  for playing levels instead of editing them.
* Wrote some documentation.
2019-07-06 18:30:03 -07:00
dc2695cfc9 Add More Trapdoor Doodads
* Add the other trapdoor directions: Left, Right and Up.
* UI: Show a color square in each Palette Swatch button in Edit Mode.
  * Instead of just the label like "solid", "fire", "decoration" it also
    shows a square box colored as the swatch color. The label and box
    are left-aligned in the button.
* Minor Play Mode physics update:
  * The player jump is now limited: they may only continue to move
    upwards for 20 ticks, after which they must touch ground before
    jumping again.
  * Remove the "press Down to move down" button. Only gravity moves you
    down.
* Fix a crash in the Editor Mode when you dragged doodads on top of each
  other. Source of bug was the loopActorCollision() function, which only
  should be useful to Play Mode, and it expected the scripting engine to
  be attached to the Canvas. In EditorMode there is no scripting engine.
2019-07-05 15:02:22 -07:00
0c22ecae5e Level Exit Doodad
* Add a Level Exit doodad, which for now is a little blue flag on a pole
  that reads "END"
* JavaScript API: global function EndLevel() will end the level. The
  exit doodad calls this when touched by the player.
* Add a "Level Completed" alert box UI to PlayScene with dynamic button
  layouts.
  * The alert box pops up when a doodad calls EndLevel() and contains
    action buttons what to do next.
  * "Play Again" restarts the current level again.
  * "Edit Level" if you came from the EditorScene; otherwise this button
    is not visible.
  * "Next Level" is a to-be-implemented button to advance in the single
    player story mode. Only shows up when PlayScene.HasNext=true.
  * "Exit to Menu" is always visible and closes out to the MainScene.
2019-07-02 15:24:46 -07:00
ba6892aa95 WASM Texture Caching
* Refactor texture caching in render.Engine:
  * New interface method: NewTexture(filename string, image.Image)
  * WASM immediately encodes the image to PNG and generates a JavaScript
    `Image()` object to load it with a data URI and keep it in memory.
  * SDL2 saves the bitmap to disk as it did before.
  * WASM: deprecate the sessionStorage for holding image data. Session
    storage methods panic if called. The image data is directly kept in
    Go memory as a js.Value holding an Image().
* Shared Memory workaround: the level.Chunk.ToBitmap() function is where
  chunk textures get cached, but it had no access to the render.Engine
  used in the game. The `pkg/shmem` package holds global pointers to
  common structures like the CurrentRenderEngine as a work-around.
  * Also shmem.Flash() so Doodle can make its d.Flash() function
    globally available, any sub-package can now flash text to the screen
    regardless of source code location.
  * JavaScript API for Doodads now has a global Flash() function
    available.
* WASM: Handle window resize so Doodle can recompute its dimensions
  instead of scaling/shrinking the view.
2019-06-27 12:03:52 -07:00
99eab19c5b Pub/Sub Messages Between Linked Actors (JavaScript)
* Implement the pub/sub message passing system that lets the JavaScript
  VM of one actor (say, a Button) send messages to other linked actors
  in the level (say, an Electric Door)
* Buttons now emit a "power(true)" message while pressed and
  "power(false)" when released. Sticky Buttons do not release and so do
  not send the power(false) message.
* Electric Doors listen for the "power" event and open or close
  themselves based on the boolean value received.
* If a Sticky Button receives power and is currently pressed down, it
  will pop back up (reset to "off" position) and notify its linked
  actors that they have lost power too. So if a Sticky Button held an
  Electric Door open, and another Button powers the Sticky Button, it
  would pop back up and also close the Electric Door.
2019-06-23 17:34:11 -07:00
567b3158f1 Minor Tweaks 2019-06-08 17:02:28 -07:00
1523deeb9c Return False: Solid Collision Between Actors
* Implement the handler code for `return false` when actors are
  colliding with each other and wish to act like solid walls.
* The locked doors will `return false` when they're closed and the
  colliding actor does not have the matching key.
* Add arbitrary key/value storage to Actors. The colored keys will set
  an actor value "key:%TITLE%" on the one who touched the key before
  destroying itself. The colored doors check that key when touched to
  decide whether to open.
* The trapdoor now only opens if you're touching it from the top (your
  overlap box Y value is 0), but if you touch it from below and the door
  is closed, it acts like a solid object.
2019-05-28 21:43:30 -07:00
a2e1bd1ccb Improve OnCollide Doodad Script Handling
* Events.OnCollide now receives a CollideEvent object, which makes
  available the .Actor who collided and the .Overlap rect which is
  zero-relative to the target actor. Doodad scripts can use the .Overlap
  to see WHERE in their own box the other actor has intruded.
  * Update the LockedDoor and ElectricDoor doodads to detect when the
    player has entered their inner rect (since their doors are narrower
    than their doodad size)
  * Update the Button doodads to only press in when the player actually
    touches them (because their sizes are shorter than their doodad
    height)
  * Update the Trapdoor to only trigger its animation when the board
    along its top has been touched, not when the empty space below was
    touched from the bottom.
* Events.OnLeave now implemented and fires when an actor who was
  previously intersecting your doodad has left.
* The engine detects when an event JS callback returns false.
  Eventually, the OnCollide can return false to signify the collision is
  not accepted and the actor should be bumped away as if they hit solid
  geometry.
2019-05-06 22:58:09 -07:00
d28745f89e Mobile Enemy Doodad Test
* Add a Red Azulian as a test for mobile enemies.
  * Its A.I. has it walk back and forth, changing directions when it
    comes up against an obstacle for a few moments.
  * It plays walking animations and can trigger collision events with
    other Doodads, such as the Electric Door and Trapdoor.
* Move Gravity responsibility to the doodad scripts themselves.
  * Call `Self.SetGravity(true)` to opt the Doodad in to gravity.
  * The canvas.Loop() adds gravity to any doodad that has it enabled.
2019-05-06 16:30:45 -07:00
a73dec9f31 Doodad Animations Managed In-Engine
* Add animation support for Doodad actors (Play Mode) into the core
  engine, so that the Doodad script can register named animations and
  play them without managing all the details themselves.
  * Doodad API functions on Self: AddAnimation, PlayAnimation,
    StopAnimation, IsAnimating
* CLI: the `doodad convert` command will name each layer after the
  filename used as the input image.
* CLI: fix the `doodad convert` command creating duplicate Palette
  colors when converting a series of input images into a Doodad.
2019-05-06 15:30:43 -07:00
f76ba6fbb7 WIP: MsgPack stubs, Level Filesystem Module
* Add some encoding/decoding functions for binary msgpack format for
  levels and doodads. Currently it writes msgpack files that can be
  decoded and printed by Python (mp2json.py) but it can't re-read from
  the binary format. For now, levels will continue to write in JSON
  format.
* Add filesystem abstraction functions to the balance/ package to search
  multiple paths to find Levels and Doodads, to make way for
  system-level doodads.
2019-05-06 12:41:46 -07:00
af35703df0 Add Azulian doodad sprites and build script 2019-05-01 18:27:20 -07:00
35d96b714d Add JavaScript panic catcher to doodads
* Add example mischievous doodad script that alters the logger date
  format and animates its canvas's mask color.
2019-04-18 22:02:59 -07:00
258b2eb285 Script Timers, Multiple Doodad Frames
* CLI: fix the `doodad convert` command to share the same Palette when
  converting each frame (layer) of a doodad so subsequent layers find
  the correct color swatches for serialization.
* Scripting: add timers and intervals to Doodad scripts to allow them to
  animate themselves or add delayed callbacks. The timers have the same
  API as a web browser: setTimeout(), setInterval(), clearTimeout(),
  clearInterval().
* Add support for uix.Actor to change its currently rendered layer in
  the level. For example a Button Doodad can set its image to Layer 1
  (pressed) when touched by the player, and Trapdoors can cycle through
  their layers to animate opening and closing.
  * Usage from a Doodad script: Self.ShowLayer(1)
* Default Doodads: added scripts for all Buttons, Doors, Keys and the
  Trapdoor to run their various animations when touched (in the case of
  Keys, destroy themselves when touched, because there is no player
  inventory yet)
2019-04-18 18:15:05 -07:00
81cb3bd617 1st Round of Doodad Sprites + Improve Doodad Tool
* Improve the `doodad convert` command to convert a series of input
  images into multiple Frames of a Doodad:
  `doodad convert frame1.png frame2.png frameN.png output.doodad`
* Add the initial round of dev-asset sprites for the default Doodads:
  * Button, Button-TypeB and Sticky Button
  * Red, Blue, Green and Yellow Locked Doors and Keys
  * Electric Door
  * Trapdoor Down
* Add dev-assets/palette.json that defines our default doodad color
  palette. Eventually the JSON will be used by the `doodad` tool to give
  the layers meaningful names.
2019-04-17 00:02:41 -07:00
1e80304061 Initial Doodad JavaScript System
* Add the JavaScript system for Doodads to run their scripts in levels,
  and wire initial OnCollide() handler support.
* CLI: Add a `doodad install-script` command to the doodad tool.
  * Usage: `doodad install-script <index.js> <filename.doodad>`
* Add dev-assets folder for storing source files for the official
  default doodads, sprites, levels, etc. and for now add a JavaScript
  for the first test doodad.
2019-04-15 23:07:40 -07:00