Commit Graph

17 Commits

Author SHA1 Message Date
d14eaf7df2 Collision Box Updates
* The F4 key to draw collision boxes works reliably again: it draws the
  player's hitbox in world-space using the canvas.DrawStrokes()
  function, rather than in screen-space so it follows the player
  reliably.
* The F4 key also draws hitboxes for ALL other actors in the level:
  buttons, enemies, doors, etc.
* The level geometry collision function is updated to respect a doodad's
  declared Hitbox from their script, which may result in a smaller box
  than their raw Canvas size. The result is tighter collision between
  doodads, and Boy's sprite is rather narrow for its square Canvas so
  collision on rightward geometry is tighter for the player character.
* Collision checks between actors also respect the actor's declared
  hitboxes now, allowing for Boy to get even closer to a locked door
  before being blocked.
2021-06-02 20:50:28 -07:00
76b7dfa4f8 Various updates
New doodad interactions:
* Sticky Buttons will emit a "sticky:down" event to linked doodads, with
  a boolean value showing the Sticky Button's state.
* Normal Buttons will listen for "sticky:down" -- when a linked Sticky
  Button is pressed, the normal Button presses in as well, and stays
  pressed while the sticky:down signal is true.
* When the Sticky Button is released (e.g. because it received power
  from another doodad), any linked buttons which were sticky:down
  release as well.
* Switch doodads emit a new "switch:toggle" event JUST BEFORE sending
  the "power" event. Sensitive Doodads can listen for switches in
  particular this way.
* The Electric Door listens for switch:toggle; if a Switch is activated,
  the Electric Door always flips its current state (open to close, or
  vice versa) and ignores the immediately following power event. This
  allows doors to toggle on/off regardless of sync with a Switch.

Other changes:
* When the player character dies by fire, instead of the message saying
  "Watch out for fire!" it will use the name of the fire swatch that
  hurt the player. This way levels could make it say "Watch out for
  spikes!" or "lava" or whatever they want. The "Fire" attribute now
  just means "instantly kills the player."
* Level Editor: You can now edit the Title and Author name of your level
  in the Page Settings window.
* Bugfix: only the player character ends the game by dying in fire.
  Other mobile doodads just turn dark but don't end the game.
* Increase the size of Trapdoor doodad sprites by 150% as they were a
  bit small for the player character.
* Rename the game from "Project: Doodle" to "Sketchy Maze"
2021-03-30 23:40:41 -07:00
695ff4da42 Collision: Fix clipping thru left walls, w/ caveats
There was a clipping bug where the player could sometimes clip thru a
left-side wall, if the left wall and floor made a 90 degree bend and the
player was holding the Left key while jumping slightly into the wall.

A band-aid that seems to work involved two steps:
1. When capping their leftward movement, add a "+ 1" to the cap.
2. At the start of the point loop, enforce the left cap like we do the
   ceiling cap.

This seems to patch the problem, BUT it breaks the ability to walk up
slopes while moving left. Right-facing slopes can be climbed fine still.

Note: the original bug never was a problem against right walls, only
left ones, but the true root cause was not identified. See TODO comments
in collide_level.go.
2020-04-11 19:21:12 -07:00
08e65c32b5 Overhaul the Platformer Physics System
* Player character now experiences acceleration and friction when
  walking around the map!
* Actor position and movement had to be converted from int's
  (render.Point) to float64's to support fine-grained acceleration
  steps.
* Added "physics" package and physics.Vector to be a float64 counterpart
  for render.Point. Vector is used for uix.Actor.Position() for the sake
  of movement math. Vector is flattened back to a render.Point for
  collision purposes, since the levels and hitboxes are pixel-bound.
* Refactor the uix.Actor to no longer extend the doodads.Drawing (so it
  can have a Position that's a Vector instead of a Point). This broke
  some code that expected `.Doodad` to directly reference the
  Drawing.Doodad: now you had to refer to it as `a.Drawing.Doodad` which
  was ugly. Added convenience method .Doodad() for a shortcut.
* Moved functions like GetBoundingRect() from doodads package to
  collision, where it uses its own slimmer Actor interface for just the
  relevant methods it needs.
2020-04-04 21:00:32 -07:00
a43e45fad0 Level Collision and Scrolling Fixes
* Fix the level collision bug that allowed clipping thru a ceiling while
  climbing up a wall.
* Fix the scrolling behavior to keep the character on-screen no matter
  how fast the character is moving, especially downwards.
* Increase player speed and gravity.
* New cheat: "ghost mode" disables clipping for the player character.
* Mark an actor as "grounded" if they fall and are stopped by the lower
  level border, so they may jump again.
2020-01-02 20:23:27 -08:00
8965a7d86a Doodads: Crumbly Floor, Start Flag & State Blocks
Add new doodads:

* Start Flag: place this in a level to set the spawn point of the player
  character. If no flag is found, the player spawns at 0,0 in the top
  corner of the map. Only use one Start Flag per level, otherwise the
  player will randomly spawn at one of them.
* Crumbly Floor: a solid floor that begins to shake and then fall apart
  after a moment when a mobile character steps on it. The floor respawns
  after 5 seconds.
* State Blocks: blue and orange blocks that toggle between solid and
  pass-thru whenever a State Button is activated.
* State Button: a solid "ON/OFF" block that toggles State Blocks back
  and forth when touched. Only activates if touched on the side or bottom;
  acts as a solid floor when walked on from the top.

New features for doodad scripts:

* Actor scripts: call SetMobile(true) to mark an actor as a mobile mob
  (i.e. player character or enemy). Other doodads can check if the actor
  colliding with them IsMobile so they don't activate if placed too close
  to other (non-mobile) doodads in a level. The Blue and Red Azulians
  are the only mobile characters so far.
* Message.Broadcast allows sending a pub/sub message out to ALL doodads
  in the level, instead of only to linked doodads as Message.Publish does.
  This is used for the State Blocks to globally communicate on/off status
  without needing to link them all together manually.
2019-12-30 18:13:28 -08:00
0437adfbf8 Change types int32 -> int per upstream render and ui library 2019-12-27 19:16:34 -08:00
ea0b41a781 Cut lib/render into its own package, change all imports 2019-12-22 18:21:58 -08:00
6af60f1128 Improve Collision Detection: More Active w/ Actors
* Improve the collision detection algorithm so that Actor OnCollide
  scripts get called more often WHILE an actor is moving, to prevent a
  fast-moving actor from zipping right through the "solid" hitbox and
  not giving the subject actor time to protest the movement.
* It's implemented by adding a `Settled` boolean to the OnCollide event
  object. When the game is testing out movement, Settled=false to give
  the actor a chance to say "I'm solid!" and have the moving party be
  stopped early.
* After all this is done, for any pair of actors still with overlapping
  hitboxes, OnCollide is called one last time with Settled=true. This is
  when the actor should run its actions (like publishing messages to
  other actors, changing state as in a trapdoor, etc.)
* The new collision detection algorithm works as follows:
  * Stage 1 is the same as before, all mobile actors are moved and
    tested against level geometry. They record their Original and New
    position during this phase.
  * Stage 2 is where we re-run that movement but ping actors being
    intersected each step of the way. We trace the steps between
    Original and New position, test OnCollide handler, and if it returns
    false we move the mobile actor to the Last Good Position along the
    trace.
  * Stage 3 we run the final OnCollide(Settled=true) to let actors run
    actions they wanted to for their collide handler, WITHOUT spamming
    those actions during Stage 2.
* This should now allow for tweaking of gravity speed and player speed
  without breaking all actor collision checking.
2019-07-16 21:07:38 -07:00
0c6c77a423 Lemon-shaped Ellipse Tool (WIP)
* Add initial Ellipse Tool to the Editor Mode. Currently there's
  something wrong with the algorithm and the ellipses have a sort of
  'lemon shape' to them.
* Refactor the IterLine/IterLine2 functions to be more consistent.
  IterLine used to be the raw algorithm that took a bunch of coordinate
  numbers and IterLine2 took two render.Point's and was the main one
  used throughout the app. Now, IterLine takes the two Points and the
  raw algorithm function removed.
2019-07-14 14:18:44 -07:00
cb02feff1d Add Switches, Fire/Water Collision and Play Menu
* New doodads: Switches.
  * They come in four varieties: wall switch (background element, with
    "ON/OFF" text) and three side-profile switches for the floor, left
    or right walls.
  * On collision with the player, they flip their state from "OFF" to
    "ON" or vice versa. If the player walks away and then collides
    again, the switch flips again.
  * Can be used to open/close Electric Doors when turned on/off. Their
    default state is "off"
  * If a switch receives a power signal from another linked switch, it
    sets its own state to match. So, two "on/off" switches that are
    connected to a door AND to each other will both flip on/off when one
    of them flips.
* Update the Level Collision logic to support Decoration, Fire and Water
  pixel collisions.
  * Previously, ALL pixels in the level were acting as though solid.
  * Non-solid pixels don't count for collision detection, but their
    attributes (fire and water) are collected and returned.
* Updated the MenuScene to support loading a map file in Play Mode
  instead of Edit Mode. Updated the title screen menu to add a button
  for playing levels instead of editing them.
* Wrote some documentation.
2019-07-06 18:30:03 -07:00
1523deeb9c Return False: Solid Collision Between Actors
* Implement the handler code for `return false` when actors are
  colliding with each other and wish to act like solid walls.
* The locked doors will `return false` when they're closed and the
  colliding actor does not have the matching key.
* Add arbitrary key/value storage to Actors. The colored keys will set
  an actor value "key:%TITLE%" on the one who touched the key before
  destroying itself. The colored doors check that key when touched to
  decide whether to open.
* The trapdoor now only opens if you're touching it from the top (your
  overlap box Y value is 0), but if you touch it from below and the door
  is closed, it acts like a solid object.
2019-05-28 21:43:30 -07:00
a2e1bd1ccb Improve OnCollide Doodad Script Handling
* Events.OnCollide now receives a CollideEvent object, which makes
  available the .Actor who collided and the .Overlap rect which is
  zero-relative to the target actor. Doodad scripts can use the .Overlap
  to see WHERE in their own box the other actor has intruded.
  * Update the LockedDoor and ElectricDoor doodads to detect when the
    player has entered their inner rect (since their doors are narrower
    than their doodad size)
  * Update the Button doodads to only press in when the player actually
    touches them (because their sizes are shorter than their doodad
    height)
  * Update the Trapdoor to only trigger its animation when the board
    along its top has been touched, not when the empty space below was
    touched from the bottom.
* Events.OnLeave now implemented and fires when an actor who was
  previously intersecting your doodad has left.
* The engine detects when an event JS callback returns false.
  Eventually, the OnCollide can return false to signify the collision is
  not accepted and the actor should be bumped away as if they hit solid
  geometry.
2019-05-06 22:58:09 -07:00
61af068b80 Load Balance Collision and Actor Loop Across CPU Cores
* Add sync.WaitGroup to some parts of the level collision detection
  function and Canvas.Loop() to speed up the frame rate by load
  balancing some work in parallel across multiple cores.
* Improves FPS from 30 to 55+ even for busy scenes with lots of mobile
  enemies walking around.
* Before the level collision optimization, framerate would sometimes dip
  to 30 FPS simply to move the player character on a completely blank
  map!
2019-05-06 17:06:40 -07:00
258b2eb285 Script Timers, Multiple Doodad Frames
* CLI: fix the `doodad convert` command to share the same Palette when
  converting each frame (layer) of a doodad so subsequent layers find
  the correct color swatches for serialization.
* Scripting: add timers and intervals to Doodad scripts to allow them to
  animate themselves or add delayed callbacks. The timers have the same
  API as a web browser: setTimeout(), setInterval(), clearTimeout(),
  clearInterval().
* Add support for uix.Actor to change its currently rendered layer in
  the level. For example a Button Doodad can set its image to Layer 1
  (pressed) when touched by the player, and Trapdoors can cycle through
  their layers to animate opening and closing.
  * Usage from a Doodad script: Self.ShowLayer(1)
* Default Doodads: added scripts for all Buttons, Doors, Keys and the
  Trapdoor to run their various animations when touched (in the case of
  Keys, destroy themselves when touched, because there is no player
  inventory yet)
2019-04-18 18:15:05 -07:00
b33d93599a Unit Tests for Collision Detection 2019-04-15 20:19:52 -07:00
f8a83cbad9 Detect Collision Between Actors
* Move all collision code into the pkg/collision package.
  * pkg/doodads/collision.go -> pkg/collision/collide_level.go
  * pkg/doodads/collide_actors.go for new Actor collide support
* Add initial collision detection code between actors in Play Mode.
2019-04-15 19:17:25 -07:00