Commit Graph

16 Commits

Author SHA1 Message Date
0fc046250e Window Focus Bugfixes
* Fix the Doodad Dropper and Registration windows not stealing the focus
  when they are opened via menu bars.
* Bugfixes in gamepad support: stop at the first controller found,
  Draw() to handle controllers going away and hide the mouse cursor
2022-02-19 20:20:58 -08:00
864156da53 Settings Window + Bugfix
* Added a Settings window for game options, such as enabling the
  horizontal toolbars in Edit Mode. The Settings window also has a
  Controls tab showing the gameplay buttons and keyboard shortcuts.
* The Settings window is available as a button on the home screen OR
  from the Edit->Settings menu in the EditScene.
* Bugfix: using WASD to move the player character now works better and
  is considered by the game to be identical to the arrow key inputs. Boy
  now updates his animation based on these keys, and they register as
  boolean on/off keys instead of affected by key-repeat.
* Refactor the boolProps: they are all part of usercfg now, and if you
  run e.g. "boolProp show-all-doodads true" and then cause the user
  settings to save to disk, that boolProp will be permanently enabled
  until turned off again.
2021-06-19 22:14:41 -07:00
d6f86487f5 Horizontal Toolbars Option for Editor Mode
On small screen sizes like the Pinephone, the toolbars in the Level
Editor are best made horizontal across the top and bottom of the screen
leaving more room for the drawing.

Enable it with a boolProp for now, and then reopen the level editor:

    boolProp horizontalToolbars true

When launching `doodle -w mobile` it will automatically enable this
option.
2021-06-13 21:23:26 -07:00
190d4be1b6 Layer Selection Window for Doodad Editor
* When editing a doodad in the Editor Mode, the toolbar has a "Lyr."
  button that opens the Layers window.
* The Layers window allows switching the active doodad layer that you
  are drawing on, as well as create and rename layers.
* With this feature, Doodads may be fully drawn in-game, including
  adding alternate named layers for animations and multiple-state
  doodads.
* Update the Pager component to have a configurable MaxPageButtons.
  Controls that have more pages than this limit will stop having buttons
  drawn after the limit. The "Forward" and "Next" buttons can still
  navigate into the extra pages.
* Refactored and centralized the various popup windows in Editor Mode
  into editor_ui_popups.go; the SetupPopups() and various methods such
  as ShowPaletteWindow() and ShowDoodadDropper() make management of
  popups simple for the editor_ui!
* The Menu Bar in Editor Mode now has context-specific tools in the
  Tools menu: the Doodad Dropper for levels and Layers for doodads.
* Bugfix the Palette Editor window to work equally between Levels and
  Doodads, by only having it care about the Palette and not the Level
  that owns it.
2020-11-16 23:23:21 -08:00
47cca8c7c6 Palette Editor and Doodad Dropper Windows
* Start the program window maximized with the `-w maximized` CLI option.
* Move the Doodad Palette off the right-side dock of the Editor Scene and
  into its own pop-up window: the DoodadDropper.
* Shrink the width of the Color Palette panel and show only the colors in
  the buttons. The name of the swatch is available in the mouse-over tooltip.
* Added an "Edit" button to the Color Palette. It opens a Palette Editor
  window where you can rename, change colors and attributes of existing colors
  OR insert new colors into your palette. (Deleting colors not yet supported).
* level.Chunker gets a Redraw method: invalidates all cached textures of all
  chunks forcing the level to redraw itself, possibly with an updated palette.
2020-07-09 19:38:37 -07:00
f0101ba048 The Window Manager Update
* Take advantage of the new Window Manager feature of the UI toolkit.
* Move the MenuScene's "New Level" and "Play/Edit Level" windows into
  stand-alone functions in new pkg/windows/ package. The 'windows'
  package is isolated from the rest of Doodle and communicates using
  config variables and callback functions to avoid circular dependency.
* MenuScene calls the window constructors from the new package.
* Add an "Options" button to the Menu Bar in the Editor Scene, which
  opens the "New Level" window to allow changing the wallpaper or
  bounding type of the level currently being edited.
* Move the cheat codes into their own file, cheats.go
2020-04-06 23:21:17 -07:00
f8ca9a0921 Tooltips Update
* Update code for recent changes in UI toolkit around event handlers for
  buttons.
* Add tooltips to various buttons in the Editor Mode. The left toolbar
  shows the names of each tool, the Doodad Palette shows the title of
  each doodad and the Color Palette shows the swatch attributes (solid,
  fire, water, etc.)
2020-03-09 22:22:22 -07:00
8965a7d86a Doodads: Crumbly Floor, Start Flag & State Blocks
Add new doodads:

* Start Flag: place this in a level to set the spawn point of the player
  character. If no flag is found, the player spawns at 0,0 in the top
  corner of the map. Only use one Start Flag per level, otherwise the
  player will randomly spawn at one of them.
* Crumbly Floor: a solid floor that begins to shake and then fall apart
  after a moment when a mobile character steps on it. The floor respawns
  after 5 seconds.
* State Blocks: blue and orange blocks that toggle between solid and
  pass-thru whenever a State Button is activated.
* State Button: a solid "ON/OFF" block that toggles State Blocks back
  and forth when touched. Only activates if touched on the side or bottom;
  acts as a solid floor when walked on from the top.

New features for doodad scripts:

* Actor scripts: call SetMobile(true) to mark an actor as a mobile mob
  (i.e. player character or enemy). Other doodads can check if the actor
  colliding with them IsMobile so they don't activate if placed too close
  to other (non-mobile) doodads in a level. The Blue and Red Azulians
  are the only mobile characters so far.
* Message.Broadcast allows sending a pub/sub message out to ALL doodads
  in the level, instead of only to linked doodads as Message.Publish does.
  This is used for the State Blocks to globally communicate on/off status
  without needing to link them all together manually.
2019-12-30 18:13:28 -08:00
b924ea9467 UI: Renamed Anchor -> Side for frame packing layout 2019-12-28 21:48:49 -08:00
0437adfbf8 Change types int32 -> int per upstream render and ui library 2019-12-27 19:16:34 -08:00
a060330450 Switch to external git.kirsle.net/go/ui package 2019-12-27 16:31:58 -08:00
ea0b41a781 Cut lib/render into its own package, change all imports 2019-12-22 18:21:58 -08:00
0c6c77a423 Lemon-shaped Ellipse Tool (WIP)
* Add initial Ellipse Tool to the Editor Mode. Currently there's
  something wrong with the algorithm and the ellipses have a sort of
  'lemon shape' to them.
* Refactor the IterLine/IterLine2 functions to be more consistent.
  IterLine used to be the raw algorithm that took a bunch of coordinate
  numbers and IterLine2 took two render.Point's and was the main one
  used throughout the app. Now, IterLine takes the two Points and the
  raw algorithm function removed.
2019-07-14 14:18:44 -07:00
cc1e441232 Eraser Tool, Brush Sizes
* Implement Brush Sizes for drawtool.Stroke and add a UI to the tools panel
  to control the brush size.
  * Brush sizes: 1, 2, 4, 8, 16, 24, 32, 48, 64
* Add the Eraser Tool to editor mode. It uses a default brush size of 16
  and a max size of 32 due to some performance issues.
* The Undo/Redo system now remembers the original color of pixels when
  you change them, so that Undo will set them back how they were instead
  of deleting the pixel entirely. Due to performance issues, this only
  happens when your Brush Size is 0 (drawing single-pixel shapes).
* UI: Add an IntVariable option to ui.Label to bind showing the value of
  an int reference.

Aforementioned performance issues:

* When we try to remember whole rects of pixels for drawing thick
  shapes, it requires a ton of scanning for each step of the shape. Even
  de-duplicating pixel checks, tons of extra reads are constantly
  checked.
* The Eraser is the only tool that absolutely needs to be able to
  remember wiped pixels AND have large brush sizes. The performance
  sucks and lags a bit if you erase a lot all at once, but it's a
  trade-off for now.
* So pixels aren't remembered when drawing lines in your level with
  thick brushes, so the Undo action will simply delete your pixels and not
  reset them. Only the Eraser can bring back pixels.
2019-07-11 19:07:46 -07:00
22440f436b Add Scrolling in the Doodad Palette Window
* Rudimentary scrolling shows a Left and Right button at the top of the
  Doodad Palette if your window is deemed not tall enough to contain all
  of the doodads.
* A "progress bar" is shown between the buttons indicating the
  percentage of your scroll down the doodad list. When you're able to
  see the final row of doodads, the progress bar is at 100%.
2019-07-03 21:55:15 -07:00
12d34517e9 Add Tool Bar to Editor Mode
* Toolbar has icon buttons for the Pencil Tool, Line Tool, Rect Tool,
  Actor Tool and Link Tool.
* Remove the tab buttons from the top of the Palette window. The palette
  tab is now toggled between Swatches and Doodads by the tool selected
  on the tool bar, instead of the tab buttons setting the tool.
* Remove the "Link Doodads" button from the Doodad Palette. The Link
  Tool has its own dedicated toolbar button with the others.
2019-07-03 20:24:04 -07:00