There was a clipping bug where the player could sometimes clip thru a
left-side wall, if the left wall and floor made a 90 degree bend and the
player was holding the Left key while jumping slightly into the wall.
A band-aid that seems to work involved two steps:
1. When capping their leftward movement, add a "+ 1" to the cap.
2. At the start of the point loop, enforce the left cap like we do the
ceiling cap.
This seems to patch the problem, BUT it breaks the ability to walk up
slopes while moving left. Right-facing slopes can be climbed fine still.
Note: the original bug never was a problem against right walls, only
left ones, but the true root cause was not identified. See TODO comments
in collide_level.go.
* Player character now experiences acceleration and friction when
walking around the map!
* Actor position and movement had to be converted from int's
(render.Point) to float64's to support fine-grained acceleration
steps.
* Added "physics" package and physics.Vector to be a float64 counterpart
for render.Point. Vector is used for uix.Actor.Position() for the sake
of movement math. Vector is flattened back to a render.Point for
collision purposes, since the levels and hitboxes are pixel-bound.
* Refactor the uix.Actor to no longer extend the doodads.Drawing (so it
can have a Position that's a Vector instead of a Point). This broke
some code that expected `.Doodad` to directly reference the
Drawing.Doodad: now you had to refer to it as `a.Drawing.Doodad` which
was ugly. Added convenience method .Doodad() for a shortcut.
* Moved functions like GetBoundingRect() from doodads package to
collision, where it uses its own slimmer Actor interface for just the
relevant methods it needs.
* Fix the level collision bug that allowed clipping thru a ceiling while
climbing up a wall.
* Fix the scrolling behavior to keep the character on-screen no matter
how fast the character is moving, especially downwards.
* Increase player speed and gravity.
* New cheat: "ghost mode" disables clipping for the player character.
* Mark an actor as "grounded" if they fall and are stopped by the lower
level border, so they may jump again.
Add new doodads:
* Start Flag: place this in a level to set the spawn point of the player
character. If no flag is found, the player spawns at 0,0 in the top
corner of the map. Only use one Start Flag per level, otherwise the
player will randomly spawn at one of them.
* Crumbly Floor: a solid floor that begins to shake and then fall apart
after a moment when a mobile character steps on it. The floor respawns
after 5 seconds.
* State Blocks: blue and orange blocks that toggle between solid and
pass-thru whenever a State Button is activated.
* State Button: a solid "ON/OFF" block that toggles State Blocks back
and forth when touched. Only activates if touched on the side or bottom;
acts as a solid floor when walked on from the top.
New features for doodad scripts:
* Actor scripts: call SetMobile(true) to mark an actor as a mobile mob
(i.e. player character or enemy). Other doodads can check if the actor
colliding with them IsMobile so they don't activate if placed too close
to other (non-mobile) doodads in a level. The Blue and Red Azulians
are the only mobile characters so far.
* Message.Broadcast allows sending a pub/sub message out to ALL doodads
in the level, instead of only to linked doodads as Message.Publish does.
This is used for the State Blocks to globally communicate on/off status
without needing to link them all together manually.
* Improve the collision detection algorithm so that Actor OnCollide
scripts get called more often WHILE an actor is moving, to prevent a
fast-moving actor from zipping right through the "solid" hitbox and
not giving the subject actor time to protest the movement.
* It's implemented by adding a `Settled` boolean to the OnCollide event
object. When the game is testing out movement, Settled=false to give
the actor a chance to say "I'm solid!" and have the moving party be
stopped early.
* After all this is done, for any pair of actors still with overlapping
hitboxes, OnCollide is called one last time with Settled=true. This is
when the actor should run its actions (like publishing messages to
other actors, changing state as in a trapdoor, etc.)
* The new collision detection algorithm works as follows:
* Stage 1 is the same as before, all mobile actors are moved and
tested against level geometry. They record their Original and New
position during this phase.
* Stage 2 is where we re-run that movement but ping actors being
intersected each step of the way. We trace the steps between
Original and New position, test OnCollide handler, and if it returns
false we move the mobile actor to the Last Good Position along the
trace.
* Stage 3 we run the final OnCollide(Settled=true) to let actors run
actions they wanted to for their collide handler, WITHOUT spamming
those actions during Stage 2.
* This should now allow for tweaking of gravity speed and player speed
without breaking all actor collision checking.
* Add initial Ellipse Tool to the Editor Mode. Currently there's
something wrong with the algorithm and the ellipses have a sort of
'lemon shape' to them.
* Refactor the IterLine/IterLine2 functions to be more consistent.
IterLine used to be the raw algorithm that took a bunch of coordinate
numbers and IterLine2 took two render.Point's and was the main one
used throughout the app. Now, IterLine takes the two Points and the
raw algorithm function removed.
* New doodads: Switches.
* They come in four varieties: wall switch (background element, with
"ON/OFF" text) and three side-profile switches for the floor, left
or right walls.
* On collision with the player, they flip their state from "OFF" to
"ON" or vice versa. If the player walks away and then collides
again, the switch flips again.
* Can be used to open/close Electric Doors when turned on/off. Their
default state is "off"
* If a switch receives a power signal from another linked switch, it
sets its own state to match. So, two "on/off" switches that are
connected to a door AND to each other will both flip on/off when one
of them flips.
* Update the Level Collision logic to support Decoration, Fire and Water
pixel collisions.
* Previously, ALL pixels in the level were acting as though solid.
* Non-solid pixels don't count for collision detection, but their
attributes (fire and water) are collected and returned.
* Updated the MenuScene to support loading a map file in Play Mode
instead of Edit Mode. Updated the title screen menu to add a button
for playing levels instead of editing them.
* Wrote some documentation.
* Implement the handler code for `return false` when actors are
colliding with each other and wish to act like solid walls.
* The locked doors will `return false` when they're closed and the
colliding actor does not have the matching key.
* Add arbitrary key/value storage to Actors. The colored keys will set
an actor value "key:%TITLE%" on the one who touched the key before
destroying itself. The colored doors check that key when touched to
decide whether to open.
* The trapdoor now only opens if you're touching it from the top (your
overlap box Y value is 0), but if you touch it from below and the door
is closed, it acts like a solid object.
* Events.OnCollide now receives a CollideEvent object, which makes
available the .Actor who collided and the .Overlap rect which is
zero-relative to the target actor. Doodad scripts can use the .Overlap
to see WHERE in their own box the other actor has intruded.
* Update the LockedDoor and ElectricDoor doodads to detect when the
player has entered their inner rect (since their doors are narrower
than their doodad size)
* Update the Button doodads to only press in when the player actually
touches them (because their sizes are shorter than their doodad
height)
* Update the Trapdoor to only trigger its animation when the board
along its top has been touched, not when the empty space below was
touched from the bottom.
* Events.OnLeave now implemented and fires when an actor who was
previously intersecting your doodad has left.
* The engine detects when an event JS callback returns false.
Eventually, the OnCollide can return false to signify the collision is
not accepted and the actor should be bumped away as if they hit solid
geometry.
* Add sync.WaitGroup to some parts of the level collision detection
function and Canvas.Loop() to speed up the frame rate by load
balancing some work in parallel across multiple cores.
* Improves FPS from 30 to 55+ even for busy scenes with lots of mobile
enemies walking around.
* Before the level collision optimization, framerate would sometimes dip
to 30 FPS simply to move the player character on a completely blank
map!
* CLI: fix the `doodad convert` command to share the same Palette when
converting each frame (layer) of a doodad so subsequent layers find
the correct color swatches for serialization.
* Scripting: add timers and intervals to Doodad scripts to allow them to
animate themselves or add delayed callbacks. The timers have the same
API as a web browser: setTimeout(), setInterval(), clearTimeout(),
clearInterval().
* Add support for uix.Actor to change its currently rendered layer in
the level. For example a Button Doodad can set its image to Layer 1
(pressed) when touched by the player, and Trapdoors can cycle through
their layers to animate opening and closing.
* Usage from a Doodad script: Self.ShowLayer(1)
* Default Doodads: added scripts for all Buttons, Doors, Keys and the
Trapdoor to run their various animations when touched (in the case of
Keys, destroy themselves when touched, because there is no player
inventory yet)
* Move all collision code into the pkg/collision package.
* pkg/doodads/collision.go -> pkg/collision/collide_level.go
* pkg/doodads/collide_actors.go for new Actor collide support
* Add initial collision detection code between actors in Play Mode.
