* Update code for recent changes in UI toolkit around event handlers for
buttons.
* Add tooltips to various buttons in the Editor Mode. The left toolbar
shows the names of each tool, the Doodad Palette shows the title of
each doodad and the Color Palette shows the swatch attributes (solid,
fire, water, etc.)
Add new doodads:
* Start Flag: place this in a level to set the spawn point of the player
character. If no flag is found, the player spawns at 0,0 in the top
corner of the map. Only use one Start Flag per level, otherwise the
player will randomly spawn at one of them.
* Crumbly Floor: a solid floor that begins to shake and then fall apart
after a moment when a mobile character steps on it. The floor respawns
after 5 seconds.
* State Blocks: blue and orange blocks that toggle between solid and
pass-thru whenever a State Button is activated.
* State Button: a solid "ON/OFF" block that toggles State Blocks back
and forth when touched. Only activates if touched on the side or bottom;
acts as a solid floor when walked on from the top.
New features for doodad scripts:
* Actor scripts: call SetMobile(true) to mark an actor as a mobile mob
(i.e. player character or enemy). Other doodads can check if the actor
colliding with them IsMobile so they don't activate if placed too close
to other (non-mobile) doodads in a level. The Blue and Red Azulians
are the only mobile characters so far.
* Message.Broadcast allows sending a pub/sub message out to ALL doodads
in the level, instead of only to linked doodads as Message.Publish does.
This is used for the State Blocks to globally communicate on/off status
without needing to link them all together manually.
* The `doodad` CLI tool got a lot of new commands:
* `doodad show` to verbosely print details about Levels and Doodads.
* `edit-level` and `edit-doodad` to update details about Levels and
Doodads, such as their Title, Author, page type and size, etc.
* Doodads gain a `Hidden bool` that hides them from the palette in
Editor Mode. The player character (Blue Azulian) is Hidden.
* Add some boolProps to the balance/ package and made a dynamic system
to easily configure these with the in-game dev console.
* Command: `boolProp list` returns available balance.boolProps
* `boolProp <name>` returns the current value.
* `boolProp <name> <true or false>` sets the value.
* The new boolProps are:
* showAllDoodads: enable Hidden doodads on the palette UI (NOTE:
reload the editor to take effect)
* writeLockOverride: edit files that are write locked anyway
* prettyJSON: pretty-format the JSON files saved by the game.
* The game's tick counter was moved from Doodle.ticks to shmem.Tick
where it is more easily available from every corner of the code.
* Fix a bug in the Level Editor where dragging an already-existing actor
from one part of your map to another, would cause it to lose all its
data (especially its UUID), breaking links to other doodads. Now the
existing Actor catches a ride on the drag object to be reinserted
later.
* Animate the Link Line visualizers between actors. They now animate a
blinking color between magenta and grey-ish.
* Add the other trapdoor directions: Left, Right and Up.
* UI: Show a color square in each Palette Swatch button in Edit Mode.
* Instead of just the label like "solid", "fire", "decoration" it also
shows a square box colored as the swatch color. The label and box
are left-aligned in the button.
* Minor Play Mode physics update:
* The player jump is now limited: they may only continue to move
upwards for 20 ticks, after which they must touch ground before
jumping again.
* Remove the "press Down to move down" button. Only gravity moves you
down.
* Fix a crash in the Editor Mode when you dragged doodads on top of each
other. Source of bug was the loopActorCollision() function, which only
should be useful to Play Mode, and it expected the scripting engine to
be attached to the Canvas. In EditorMode there is no scripting engine.
* Rudimentary scrolling shows a Left and Right button at the top of the
Doodad Palette if your window is deemed not tall enough to contain all
of the doodads.
* A "progress bar" is shown between the buttons indicating the
percentage of your scroll down the doodad list. When you're able to
see the final row of doodads, the progress bar is at 100%.
* Toolbar has icon buttons for the Pencil Tool, Line Tool, Rect Tool,
Actor Tool and Link Tool.
* Remove the tab buttons from the top of the Palette window. The palette
tab is now toggled between Swatches and Doodads by the tool selected
on the tool bar, instead of the tab buttons setting the tool.
* Remove the "Link Doodads" button from the Doodad Palette. The Link
Tool has its own dedicated toolbar button with the others.
* Add support for the LineTool and RectTool while in the EditorMode to
easily draw straight lines and rectangle outlines.
* Key bindings were added to toggle tools in lieu of a proper UI to
select the tool from a toolbar.
* "F" for Pencil (Freehand) Tool (since "P" is for "Playtest")
* "L" for Line Tool
* "R" for Rectangle Tool
* Add a Level Exit doodad, which for now is a little blue flag on a pole
that reads "END"
* JavaScript API: global function EndLevel() will end the level. The
exit doodad calls this when touched by the player.
* Add a "Level Completed" alert box UI to PlayScene with dynamic button
layouts.
* The alert box pops up when a doodad calls EndLevel() and contains
action buttons what to do next.
* "Play Again" restarts the current level again.
* "Edit Level" if you came from the EditorScene; otherwise this button
is not visible.
* "Next Level" is a to-be-implemented button to advance in the single
player story mode. Only shows up when PlayScene.HasNext=true.
* "Exit to Menu" is always visible and closes out to the MainScene.
* Load SDL2 fonts from go-bindata storage so we don't have to ship
external font files on disk.
* Dedupe names of doodads so we don't show double on the front-end
(go-bindata bundled doodads + those on local filesystem)
* Use go-bindata for accessing wallpaper images.
* Better flashed messages walking you through the Link Tool.
* Stylize the title screen (MainScene) by rendering a live example level
as the background wallpaper, with mobile doodads in motion.
* Instead of needing to press the "P" and "E" keys to toggle from edit
mode to play mode (and back again), respectively, the UI now draws a
"Play (P)" or "Edit (E)" button on the bottom right corner of the
level canvas. Clicking it will toggle the mode.
* Fix the EditorUI not showing the correct palette baked into the level
and only showing the default. This was tricky because the palette UI
can only be configured at setup time but not updated later.
* Add a new default palette for the Blueprint theme. Blueprint has a
dark background, so the palette colors should be bright. This palette
is chosen when you start a map with the blueprint wallpaper.
* Add a background Canvas to the MenuScene. In the "New Level" screen,
the background canvas will update to show the wallpaper settings
you've chosen as a preview of the level theme you're about to create.
* To the MenuScene add the "Load Drawing" window UI.
* Displays the user's Levels and Doodads using rows of buttons, 4
buttons per row. Clicking the button loads the EditorScene with that
filename.
* Free Version does not display the Doodads label or button on this
menu screen.
* Debug mode: no longer enables the DebugOverlay (F3) by default, but
does now insert the current FPS counter into the window title bar.
* ui.Frame: set a default "mostly transparent" BG color so the frame
background doesn't render as white.
* Add the MenuScene which will house the game's main menus.
* The "New Level" menu is first to be added.
* UI lets you pick Page Type and Wallpaper using radio buttons.
* Page Type: Unbounded, Bounded (default), No Negative Space, Bordered
* Fix bugs in uix.Canvas to fully support all these page types.
* On the Doodads tab is the Link button to enter the Link Tool.
* Click Link, then click the 1st doodad on the level, then click the 2nd
doodad to complete the link.
* The actors struct in the Level holds the link IDs for each actor.
* Build the app with -tags="shareware" to compile the free/shareware
build of the game.
* `make build-free` compiles both binaries to the bin/ folder in
shareware mode.
* The constant balance.FreeVersion is true in the shareware build and
all functionality related to the Doodad Editor UI mode is disabled
in this build mode.
The "Save As" and "Open" buttons still used an old implementation that
assumed you were talking about files only in the "./maps" folder instead
of loading them from the user's levels and doodads folders.
Now all of the menu buttons in Edit Mode intelligently open files the
same as the `edit <filename>` command from the dev console. You can omit
the file extension and it will attempt to load a Level before a Doodad
to find the first named file, or provide the full extension to be
specific.
* Scenes can insert custom key/value labels to the debug overlay and
track string variables in real time
* Added ability to unthrottle FPS in main loop
