Adds some support for "less giant" level screenshots.
* In the Editor, the Level->Take Screenshot menu will render a cropped screen
shot of just the level viewport on screen. Note: it is not an SDL2 screen
copy but generated from scratch from the level data.
* In levels themselves, screenshots can be stored inside the level data in
three different sizes: large (1280x720), medium and small (each a halved
size of the previous).
* The first screenshot is created when the level is saved, starting from
wherever the scroll position in the editor is at, and recording the 720p
view of the level from there.
* The level screenshot can be previewed and updated in the Level Properties
window of the editor: so you can scroll the editor to just the right position
and take a good screenshot to represent your level.
* In the future: these embedded level screenshots will be displayed on the
Story Mode and other screens to see a preview of each level.
Other tweaks:
* When taking a Giant Screenshot: a confirm modal will warn the player that
it may take a while. And during the screenshot, show the new Wait Modal to
block player interaction until the screenshot has finished.
Convert the Chunker size to a uint8 so chunk sizes are limited to 255px. This
means that inside of a chunk, uint8's can track the relative pixel coordinates
and result in a great memory savings since all of these uint8's are currently
64-bits wide apiece.
WIP on rectangular shaped doodads:
* You can create such a doodad in the editor and draw it normally.
* It doesn't draw the right size when dragged into your level however:
- In uix.Actor.Size() it gets a rect of the doodad's square Chunker size,
instead of getting the proper doodad.Size rect.
- If you give it the doodad.Size rect, it draws the Canvas size correctly
instead of a square - the full drawing appears and in gameplay its hitbox
(assuming the same large rectangle size) works correctly in-game.
- But, the doodad has scrolling issues when it gets to the top or left edge
of the screen! This old gnarly bug has come back. For some reason square
canvas doodads draw correctly but rectangular ones have the drawing scroll
just a bit - how far it scrolls is proportional to how big the doodad is,
with the Start Flag only scrolling a few pixels before it stops.
New features:
* Flood Tool for the editor. It replaces pixels of one color with another,
contiguously. Has limits on how far from the original pixel it will color,
to avoid infinite loops in case the user clicked on wide open void. The
limit when clicking an existing color is 1200px or only a 600px limit if
clicking into the void.
* Cheat code: 'master key' to play locked Story Mode levels.
Level GameRules feature added:
* A new tab in the Level Properties dialog
* Difficulty has been moved to this tab
* Survival Mode: for silver high score, longest time alive is better than
fastest time, for Azulian Tag maps. Gold high score is still based on
fastest time - find the hidden level exit without dying!
Tweaks to the Azulians' jump heights:
* Blue Azulian: 12 -> 14
* Red Azulian: 14 -> 18
* White Azulian: 16 -> 20
Bugs fixed:
* When editing your Palette to rename a color or add a new color, it wasn't
possible to draw with that color until the editor was completely unloaded
and reloaded; this is now fixed.
* Minor bugfix in Difficulty.String() for Peaceful (-1) difficulty to avoid
a negative array index.
* Try and prevent user giving the same name to multiple swatches on their
palette. Replacing the whole palette can let duplication through still.
* Fix the Doodad Dropper and Registration windows not stealing the focus
when they are opened via menu bars.
* Bugfixes in gamepad support: stop at the first controller found,
Draw() to handle controllers going away and hide the mouse cursor
* magicform is a helper package that may eventually be part of the go/ui
library, for easily creating structured form layouts.
* The Level Publisher UI is the first to utilize magicform.
Refactor how level publishing works:
* Level data now stores SaveDoodads and SaveBuiltins (bools) and when
the level editor saves the file, it will attach custom and/or builtin
doodads just before save.
* Move the menu item from the File menu to Level->Publish
* The Publisher UI just shows the checkboxes to toggle the level
settings and a convenient Save button along with descriptive text.
* Free versions get the "Register" window popping up if they click the
Save Now button from within the publisher window.
Note: free versions can still toggle the booleans on/off but their game
will not attach any new doodads on save.
* Free games which open a level w/ embedded doodads will get a pop-up
warning that the doodads aren't available.
* If they DON'T turn off the SaveDoodads option, they can still edit and
save the level and keep the existing doodads attached.
* If they UNCHECK the option and save, all attached doodads are removed
from the level.
* Switch from otto to goja for JavaScript engine.
* goja supports many ES6 syntax features like arrow functions,
const/let, for-of with more coming soon.
* Same great features as otto, more modern environment for doodads!
* New doodad: Invisible Warp Door
* All warp doors require the player to be grounded (if affected by
gravity) to open them. No jumping or falling thru and opening
a warp door mid-air!
* Title Screen now randomly selects from a couple of levels.
* Title Screen: if it fails to load a level it sets up a basic
blank level with a wallpaper instead.
* New developer shell command: titlescreen <level>
Opens the MainScene with a custom user level as the background.
* Add Auto-save to the Editor to save your drawing every 5 minutes
* Add a MenuBar to the Play Scene for easier navigation to other
features of the game.
* Doodad JS API: time.Since() now available.
* SDL2 builds of the game now set their app window icon.
* Create/Edit Level window is updated to show a tabbed UI to create a
new Level or a new Doodad. The dedicated main menu button to create a
new doodad (which immediately prompted for its size) is replaced by
this new tab's UI.
* Edit Drawing/Play Level window is more responsive to smaller screen
sizes by drawing fewer columns of filenames.
* Bugfix: the Alert and Confirm modals always re-center themselves on
screen, especially to adapt between Portrait or Landscape mode on a
mobile device.
* The "Giant Screenshot" feature takes a very long time, so it is made
asynchronous. If you try and run a second one while the first is busy,
you get an error flash. You can continue editing the level, even
playtest it, or load a different level, and it will continue crunching
on the Giant Screenshot and flash when it's finished.
* Updated the player physics to use proper Velocity to jump off the
ground rather than the hacky timer-based fixed speed approach.
* FlashError() function to flash "error level" messages to the screen.
They appear in orange text instead of the usual blue, and most error
messages in the game use this now. The dev console "error <msg>"
command can simulate an error message.
* Flashed message fonts are updated. The blue font now uses softer
stroke and shadow colors and the same algorithm applies to the orange
error flashes.
Some other changes to player physics:
* Max velocity, acceleration speed, and gravity have been tweaked.
* Fast turn-around if you are moving right and then need to go left.
Your velocity resets to zero at the transition so you quickly get
going the way you want to go.
Some levels that need a bit of love for the new platforming physics:
* Tutorial 3.level
* New keybind: 'v' to open a new Viewport in the Level Editor.
* New keybind: Backspace to close the topmost UI window,
and Shift+Backspace to close them all.
* Zoom has graduated out of experimental feature status. Still a bit
buggy but workable.
* Viewport windows now copy the Tool and BrushSize of the toplevel
editor, so drawing in and out of viewports works well.
* Viewport window UI improved: buttons to grow or shrink the window
size, refresh the actors, etc.
In the Level Editor, the "Level->New viewport" menu opens a window with
its own view into your level. You can open as many viewports as you
want.
* Mouse over a viewport and the arrow keys scroll that canvas instead of
the main editor canvas!
* You can draw inside the viewports! A selectbox to choose the tool to
draw with. No palette or thickness support yet!
* The actors are installed as-is when the viewport is created and it
doesn't show any changes to actors after. Make a new viewport for a
refreshed view.
* Strokes committed inside the viewport show up in the main editor (and
in other viewports), and vice versa. The viewports accurately track
changes to the level's colors, just not the actors.
* Fun feature to load a DIFFERENT level inside of the viewport! Editing
that level doesn't save changes or anything.
In the Level Editor, the "Level->Giant Screenshot" menu will take a full
scale PNG screenshot of the entire level, with its wallpaper and
doodads, and save it in ~/.config/doodle/screenshots.
It is currently CPU intensive and slow. With future work it should be
made asynchronous. The function is abstracted away nicely so that the
doodad CLI tool may support this as well.
Progress on the Zoom feature: when you zoom in and out, you can draw
shapes accurately onto the level. Seems a little buggy if you edit
while scrolling (as in drawing a very long line).
The title screen buttons are now more colorful.
The Doodad Properties window brings many features that used to be
available only in the `doodad` CLI tool into the Doodad Editor.
* In the Doodad Editor there is a new menubar item: "Doodad" which
corresponds to the "Level" menu when you're editing a level.
* The "Doodad" menu has two items:
- "Doodad Properties" (NEW)
- "Layers" (moved here from the Tools menu)
* The Doodad Properties window lets you edit the Title and Author values
of the doodad, as well as modify its Tags and manage its Script.
* Its script can be attached (browse for .js file on disk), its existing
script saved back to disk (dev shell prompt) or deleted altogether
from the doodad.
* You can create, modify, and delete Tags on the doodad.
Other changes:
* In the Level Editor, the "Level->Page Settings" menu is renamed to
"Level->Level Properties" to match with "Doodad->Doodad Properties"
and the pop-up window is retitled accordingly.
* The Exit Flag only exits if the Player touches it - not just any
mobile doodad!
* Holding Shift while pressing arrow keys in the editor will scroll by
just 1 pixel per tick to aid in precise debugging with the Zoom In/Out
feature.
* The keybinds used in canvas_editable.go to catch the arrow keys are
updated to use our nice keybind package. As a consequence, the WASD
keys will also scroll the level.
* The "d for Doodads" keybind is renamed "q" so as not to open the
Doodads window whenever scrolling right using the WASD keys.
* Added a Settings window for game options, such as enabling the
horizontal toolbars in Edit Mode. The Settings window also has a
Controls tab showing the gameplay buttons and keyboard shortcuts.
* The Settings window is available as a button on the home screen OR
from the Edit->Settings menu in the EditScene.
* Bugfix: using WASD to move the player character now works better and
is considered by the game to be identical to the arrow key inputs. Boy
now updates his animation based on these keys, and they register as
boolean on/off keys instead of affected by key-repeat.
* Refactor the boolProps: they are all part of usercfg now, and if you
run e.g. "boolProp show-all-doodads true" and then cause the user
settings to save to disk, that boolProp will be permanently enabled
until turned off again.
