Commit Graph

17 Commits

Author SHA1 Message Date
13ae66e1fa Bash for Makefiles 2021-09-06 14:06:55 -07:00
0518df226c New Doodad: Anvil
* The Anvil doodad is affected by gravity and becomes dangerous when
  falling. If it lands on the player character, you die! If it lands on
  any other mobile doodad, it destroys it! It can land on solid doodads
  such as the Electric Trapdoor and the Crumbly Floor. It will activate
  a Crumbly Floor if it lands on one, and can activate buttons and
  switches that it passes.
* JavaScript API: FailLevel(message) can be called from a doodad to kill
  the player character. The Anvil does this if it collides with the
  player while it's been falling.
2021-08-08 21:57:41 -07:00
810ba193d9 Doodads: Electric Trapdoor and Resettable Box
* New doodad: Electric Trapdoor. It is a horizontal version of the
  Electric Door. Opens while powered by a button or a switch and closes
  when it loses power.
* The Box doodad will reset to its original location if it receives a
  power signal from a linked Button or Switch. So for box pushing
  puzzles you can add a reset button in case the boxes get stuck.
* Refactored the Doodad build scripts into many Makefiles for easier
  iteration (don't need to compile ALL doodads to test one).

Updates to the JavaScript API for doodads:

* Self.MoveTo(Point) is now available to set the actor's position in
  world coordinates.
2021-08-08 20:10:42 -07:00
76b7dfa4f8 Various updates
New doodad interactions:
* Sticky Buttons will emit a "sticky:down" event to linked doodads, with
  a boolean value showing the Sticky Button's state.
* Normal Buttons will listen for "sticky:down" -- when a linked Sticky
  Button is pressed, the normal Button presses in as well, and stays
  pressed while the sticky:down signal is true.
* When the Sticky Button is released (e.g. because it received power
  from another doodad), any linked buttons which were sticky:down
  release as well.
* Switch doodads emit a new "switch:toggle" event JUST BEFORE sending
  the "power" event. Sensitive Doodads can listen for switches in
  particular this way.
* The Electric Door listens for switch:toggle; if a Switch is activated,
  the Electric Door always flips its current state (open to close, or
  vice versa) and ignores the immediately following power event. This
  allows doors to toggle on/off regardless of sync with a Switch.

Other changes:
* When the player character dies by fire, instead of the message saying
  "Watch out for fire!" it will use the name of the fire swatch that
  hurt the player. This way levels could make it say "Watch out for
  spikes!" or "lava" or whatever they want. The "Fire" attribute now
  just means "instantly kills the player."
* Level Editor: You can now edit the Title and Author name of your level
  in the Page Settings window.
* Bugfix: only the player character ends the game by dying in fire.
  Other mobile doodads just turn dark but don't end the game.
* Increase the size of Trapdoor doodad sprites by 150% as they were a
  bit small for the player character.
* Rename the game from "Project: Doodle" to "Sketchy Maze"
2021-03-30 23:40:41 -07:00
3892087932 Doodads: Use Key and Working Warp Doors
* The "Use Key" (Q or Spacebar) now activates the Warp Door instead of a
  collision event doing so.
* Warp Doors are now functional: the player opens a door, disappears,
  the door closes; player is teleported to the linked door which opens,
  appears the player and closes.
* If the player exits thru a Blue or Orange door which is disabled
  (dotted outline), the door still opens and drops the player off but
  returns to a Disabled state, acting as a one-way door.
* Clean up several debug log lines from Doodle and doodad scripts.
2021-01-03 15:19:21 -08:00
38614ee280 Tighten Doodad JavaScript API, User Documentation
* Tightens up the surface area of API methods available to the
  JavaScript VMs for doodads. Variables and functions are carefully
  passed in one-by-one so the doodad script can only access intended
  functions and not snoop on undocumented APIs.
* Wrote tons of user documentation for Doodad Scripts: documented the
  full surface area of the exposed JavaScript API now that the surface
  area is known and limited.
* Early WIP code for the Campaign JSON
2020-04-21 23:50:45 -07:00
08e65c32b5 Overhaul the Platformer Physics System
* Player character now experiences acceleration and friction when
  walking around the map!
* Actor position and movement had to be converted from int's
  (render.Point) to float64's to support fine-grained acceleration
  steps.
* Added "physics" package and physics.Vector to be a float64 counterpart
  for render.Point. Vector is used for uix.Actor.Position() for the sake
  of movement math. Vector is flattened back to a render.Point for
  collision purposes, since the levels and hitboxes are pixel-bound.
* Refactor the uix.Actor to no longer extend the doodads.Drawing (so it
  can have a Position that's a Vector instead of a Point). This broke
  some code that expected `.Doodad` to directly reference the
  Drawing.Doodad: now you had to refer to it as `a.Drawing.Doodad` which
  was ugly. Added convenience method .Doodad() for a shortcut.
* Moved functions like GetBoundingRect() from doodads package to
  collision, where it uses its own slimmer Actor interface for just the
  relevant methods it needs.
2020-04-04 21:00:32 -07:00
7142c76b86 Initial Guidebook code 2020-03-09 22:21:59 -07:00
b4922edf5d Doodad Tool: Add Tag Support for edit-doodad
* The `doodad edit-doodad` command now allows setting custom key/value
  tags in doodad files, for extra data storage useful to their scripts.
* Colored keys and doors now store a `color` tag with the appropriate
  color so that their scripts don't have to parse their Title to find
  that information.
* Trapdoors now store a `direction` tag to hold the direction the door
  is facing.
2020-01-02 22:12:20 -08:00
6af60f1128 Improve Collision Detection: More Active w/ Actors
* Improve the collision detection algorithm so that Actor OnCollide
  scripts get called more often WHILE an actor is moving, to prevent a
  fast-moving actor from zipping right through the "solid" hitbox and
  not giving the subject actor time to protest the movement.
* It's implemented by adding a `Settled` boolean to the OnCollide event
  object. When the game is testing out movement, Settled=false to give
  the actor a chance to say "I'm solid!" and have the moving party be
  stopped early.
* After all this is done, for any pair of actors still with overlapping
  hitboxes, OnCollide is called one last time with Settled=true. This is
  when the actor should run its actions (like publishing messages to
  other actors, changing state as in a trapdoor, etc.)
* The new collision detection algorithm works as follows:
  * Stage 1 is the same as before, all mobile actors are moved and
    tested against level geometry. They record their Original and New
    position during this phase.
  * Stage 2 is where we re-run that movement but ping actors being
    intersected each step of the way. We trace the steps between
    Original and New position, test OnCollide handler, and if it returns
    false we move the mobile actor to the Last Good Position along the
    trace.
  * Stage 3 we run the final OnCollide(Settled=true) to let actors run
    actions they wanted to for their collide handler, WITHOUT spamming
    those actions during Stage 2.
* This should now allow for tweaking of gravity speed and player speed
  without breaking all actor collision checking.
2019-07-16 21:07:38 -07:00
dc2695cfc9 Add More Trapdoor Doodads
* Add the other trapdoor directions: Left, Right and Up.
* UI: Show a color square in each Palette Swatch button in Edit Mode.
  * Instead of just the label like "solid", "fire", "decoration" it also
    shows a square box colored as the swatch color. The label and box
    are left-aligned in the button.
* Minor Play Mode physics update:
  * The player jump is now limited: they may only continue to move
    upwards for 20 ticks, after which they must touch ground before
    jumping again.
  * Remove the "press Down to move down" button. Only gravity moves you
    down.
* Fix a crash in the Editor Mode when you dragged doodads on top of each
  other. Source of bug was the loopActorCollision() function, which only
  should be useful to Play Mode, and it expected the scripting engine to
  be attached to the Canvas. In EditorMode there is no scripting engine.
2019-07-05 15:02:22 -07:00
567b3158f1 Minor Tweaks 2019-06-08 17:02:28 -07:00
1523deeb9c Return False: Solid Collision Between Actors
* Implement the handler code for `return false` when actors are
  colliding with each other and wish to act like solid walls.
* The locked doors will `return false` when they're closed and the
  colliding actor does not have the matching key.
* Add arbitrary key/value storage to Actors. The colored keys will set
  an actor value "key:%TITLE%" on the one who touched the key before
  destroying itself. The colored doors check that key when touched to
  decide whether to open.
* The trapdoor now only opens if you're touching it from the top (your
  overlap box Y value is 0), but if you touch it from below and the door
  is closed, it acts like a solid object.
2019-05-28 21:43:30 -07:00
a2e1bd1ccb Improve OnCollide Doodad Script Handling
* Events.OnCollide now receives a CollideEvent object, which makes
  available the .Actor who collided and the .Overlap rect which is
  zero-relative to the target actor. Doodad scripts can use the .Overlap
  to see WHERE in their own box the other actor has intruded.
  * Update the LockedDoor and ElectricDoor doodads to detect when the
    player has entered their inner rect (since their doors are narrower
    than their doodad size)
  * Update the Button doodads to only press in when the player actually
    touches them (because their sizes are shorter than their doodad
    height)
  * Update the Trapdoor to only trigger its animation when the board
    along its top has been touched, not when the empty space below was
    touched from the bottom.
* Events.OnLeave now implemented and fires when an actor who was
  previously intersecting your doodad has left.
* The engine detects when an event JS callback returns false.
  Eventually, the OnCollide can return false to signify the collision is
  not accepted and the actor should be bumped away as if they hit solid
  geometry.
2019-05-06 22:58:09 -07:00
a73dec9f31 Doodad Animations Managed In-Engine
* Add animation support for Doodad actors (Play Mode) into the core
  engine, so that the Doodad script can register named animations and
  play them without managing all the details themselves.
  * Doodad API functions on Self: AddAnimation, PlayAnimation,
    StopAnimation, IsAnimating
* CLI: the `doodad convert` command will name each layer after the
  filename used as the input image.
* CLI: fix the `doodad convert` command creating duplicate Palette
  colors when converting a series of input images into a Doodad.
2019-05-06 15:30:43 -07:00
258b2eb285 Script Timers, Multiple Doodad Frames
* CLI: fix the `doodad convert` command to share the same Palette when
  converting each frame (layer) of a doodad so subsequent layers find
  the correct color swatches for serialization.
* Scripting: add timers and intervals to Doodad scripts to allow them to
  animate themselves or add delayed callbacks. The timers have the same
  API as a web browser: setTimeout(), setInterval(), clearTimeout(),
  clearInterval().
* Add support for uix.Actor to change its currently rendered layer in
  the level. For example a Button Doodad can set its image to Layer 1
  (pressed) when touched by the player, and Trapdoors can cycle through
  their layers to animate opening and closing.
  * Usage from a Doodad script: Self.ShowLayer(1)
* Default Doodads: added scripts for all Buttons, Doors, Keys and the
  Trapdoor to run their various animations when touched (in the case of
  Keys, destroy themselves when touched, because there is no player
  inventory yet)
2019-04-18 18:15:05 -07:00
81cb3bd617 1st Round of Doodad Sprites + Improve Doodad Tool
* Improve the `doodad convert` command to convert a series of input
  images into multiple Frames of a Doodad:
  `doodad convert frame1.png frame2.png frameN.png output.doodad`
* Add the initial round of dev-asset sprites for the default Doodads:
  * Button, Button-TypeB and Sticky Button
  * Red, Blue, Green and Yellow Locked Doors and Keys
  * Electric Door
  * Trapdoor Down
* Add dev-assets/palette.json that defines our default doodad color
  palette. Eventually the JSON will be used by the `doodad` tool to give
  the layers meaningful names.
2019-04-17 00:02:41 -07:00