* Remove several unused functions in doodad.Drawing (velocity, acceleration,
grounded, etc.) - uix.Actor is where these are actually managed.
* In the JavaScript API, setTimeout() and setInterval() will translate the
milliseconds from wallclock time into a fixed number of game ticks to match
the target frame rate for better deterministic timing.
* Fix collision detection to allow actors to walk up slopes smoothly, without
losing any horizontal velocity.
* Fix scrolling a level canvas so that chunks near the right or bottom edge
of the viewpoint were getting culled prematurely.
* Centralize JavaScript exception catching logic to attach Go and JS stack
traces where possible to be more useful for debugging.
* Performance: flush all SDL2 textures from memory between scene transitions
in the app. Also add a `flush-textures` dev console command to flush the
textures at any time - they all should regenerate if still needed based on
underlying go.Images which can be garbage collected.
* Rework the Story Mode UI to display level thumbnails.
* Responsive UI: defaults to wide screen mode and shows 3 levels horizontally
but on narrow/mobile display, shows 2 levels per page in portrait.
* Add "Tiny" screenshot size (224x126) to fit the Story Mode UI.
* Make the pager buttons bigger and more touchable.
* Maximize the game window on startup unless the -w option with a specific
window resolution is provided.
* Add an exception catcher that pops open a UI window showing errors that
occur in doodad scripts during gameplay.
* Shows a preview of the header of the error (character wrapped) with a
Copy button to copy the full raw text to clipboard for inspection.
* Buttons to dismiss the modal once or stop any further errors from
opening during this gameplay session (until next restart).
* Add developer shell commands to test the exception catcher:
- 'throw <message>' to throw a custom message.
- 'throw2' to stress test a "long" message.
- 'throw3' to throw a realistic message copied from an actual error.
* Scripting engine: console.log() and friends will now insert the script
VM's name in front of its messages (the filename + actor ID).
Adds several new doodads to the game and 5 new wallpapers (parchment
paper in blue, green, red, white and yellow).
New doodads:
* Crusher: A purple block-headed mob wearing an iron helmet. It tries
to crush the player when you get underneath. Its flat helmet can be
ridden on like an elevator back up.
* Snake: A green stationary mob that always faces toward the player.
If the player is nearby and jumps, the Snake will jump too and hope
to catch the player in mid-air.
* Gems and Totems: A new key & lock collectible. Gems have quantity so
you can collect multiple, and place them into matching Totems. A
Totem gives off a power signal when its gem is placed and all other
Totems it is linked to have also been activated. A single Totem may
link to an Electric Door and require only one gem to open it, or it
can link to other Totems and they all require gems before the power
signal is sent out.
* The blue bird follows the same base AI as the red bird (it has a
target altitude that it tries to maintain, and it will dive at the
player) but the blue bird flies in a sine wave pattern around its
target altitude. It also has a longer scan radius to search for the
player than the red bird.
* The sine wave pattern of the blue bird means you may fly under its
radar depending how high it is on average.
Cheat codes that replace the player character are refactored to make
it easier to extend, and new cheats have been added:
* super azulian: play as the Red Azulian.
* hyper azulian: play as the White Azulian.
* bluebird: play as the new Bird (blue).
* The level.FileSystem type has updated to support ZIP files too.
* Legacy levels loaded from gz/json have their old FileSystem as a
simple map[filename]data and this parses from JSON OK.
* On save to zip, the legacy loaded file data gets exported to ZIP.
* Going forward: newly added or deleted files during runtime are kept in
the legacy file map until the next save when the filemap is again
flushed out to ZIP.
* For regular read-access, the FileSystem reads from the ZIP file if the
data is not in the hot map (legacy file or recently modified
attachment).
* Bugfix: be sure to Inflate() the Level/Doodad after loading from
zipfile - it used to be that directly after a save, trying to play the
level failed because the Level.Actors struct was missing their IDs,
and similarly recently written chunks would error out (become black
voids) on levels/doodads so we Inflate() both after save/replacing
their zip handle.
Instead of the loadscreen eager-loading ALL level chunks to Go Images, only
load the chunks within the "LoadingViewport" - which is the on-screen
Viewport plus a margin of chunks off the screen edges.
During gameplay, every few ticks, reevaluate which chunks are inside or
outside the LoadingViewport; for chunks outside, free their SDL2 textures
and free their cached bitmaps to keep overall memory usage down. The
AzulianTag-Forest level now stays under 200 Textures at any given time
and the loadscreen goes faster as it doesn't have to load every chunk's
images up front.
The LoadUnloadChunk feature can be turned on/off with feature flags. If
disabled the old behavior is restored: loadscreen loads all images and
the LoadUnloadChunks function is not run.
Other changes:
* loadscreen: do not free textures in the Hide() function as this runs on
a different goroutine and may break. The 4 wallpaper textures are OK
to keep in memory anyway, the loadscreen is reused often!
* Free more leaked textures: on the Inventory frame and when an actor
calls Self.Destroy()
* Stop leaking goroutines in the PubSub feature of the doodad script
engine; scripting.Supervisor.Teardown() sends a stop signal to all
scripts to clean up neatly. Canvas.Destroy() tears down its scripting
supervisor automatically.
Link a Doodad to a Checkpoint Flag (like you would a Start Flag) and
crossing the flag will replace the player with that doodad. Multiple
checkpoint flags like this can toggle you between characters.
* Azulians are now friendly to player characters who have the word
"Azulian" in their title.
* Improve Bird as the playable character:
* Dive animation if the player flies diagonally downwards
* Animation loop while hovering in the air instead of pausing
* Checkpoint flags don't spam each other on PubSub so much which could
sometimes lead to deadlocks!
SetPlayerCharacter added to the JavaScript API. The Checkpoint Flag
(not the region) can link to a doodad and replace the player character
with that linked doodad when you activate the checkpoint:
Actors.SetPlayerCharacter(filename string): like "boy.doodad"
Add various panic catchers to make JavaScript safer and log issues
to console.
New functions are available on the JavaScript API for doodads:
* Actors.At(Point) []*Actor: returns actors intersecting a point
* Actors.FindPlayer() *Actor: returns the nearest player character
* Actors.New(filename string): create a new actor (NOT TESTED YET!)
* Self.Grounded() bool: query the grounded status of current actor
With this the game's built-in doodads have been revised:
* Bird: will now scan 240 pixels diagonally searching for the player
character and will dive if seen. The Bird is dangerous while
diving. It will return to its original altitude once it touches
the ground.
* Azulians: the Azulians are now dangerous to player characters but
not to the Thief. Azulians will begin to follow the player when
they are within the aggro range and will hop if the player is
above them to try and overcome obstacles.
* Blue Azulian: aggro is (250, 100) jump speed 12 movement 2
* Red Azulian: aggro is (250, 200) jump speed 14 movement 4
* Switch from otto to goja for JavaScript engine.
* goja supports many ES6 syntax features like arrow functions,
const/let, for-of with more coming soon.
* Same great features as otto, more modern environment for doodads!
* New doodad: Invisible Warp Door
* All warp doors require the player to be grounded (if affected by
gravity) to open them. No jumping or falling thru and opening
a warp door mid-air!
* Title Screen now randomly selects from a couple of levels.
* Title Screen: if it fails to load a level it sets up a basic
blank level with a wallpaper instead.
* New developer shell command: titlescreen <level>
Opens the MainScene with a custom user level as the background.
* Add Auto-save to the Editor to save your drawing every 5 minutes
* Add a MenuBar to the Play Scene for easier navigation to other
features of the game.
* Doodad JS API: time.Since() now available.
- Fix a memory sharing bug in the Giant Screenshot feature.
- Main Menu to eagerload chunks in the background to make scrolling less
jittery. No time for a loadscreen!
- Extra script debugging: names/IDs of doodads are shown when they send
messages to one another.
- Level Properties: you can edit the Bounded max width/height values for
the level.
Doodad changes:
- Buttons: fix a timing bug and keep better track of who is stepping on it,
only popping up when all colliders have left. The effect: they pop up
immediately (not after 200ms) and are more reliable.
- Keys: zero-qty keys will no longer put themselves into the inventory of
characters who already have one except for the player character. So
the Thief will not steal them if she already has the key.
Added to the JavaScript API:
* time.Hour, time.Minute, time.Second, time.Millisecond, time.Microsecond
* New Doodad: Checkpoint Flag. They update the player's spawn point
whenever the player passes one. The most recently activated
checkpoint is rendered brighter than the others.
* End Level Modal: the fake alert box window drawn by the Play Mode
is replaced with a fancy modal widget (similar to Alert and Confirm).
It handles level victory or failure conditions and can show or hide
all the buttons as needed.
* Gameplay: There is a "Retry from Checkpoint" option added, which
appears in the level failure modal. It will teleport you back to
the Start Flag or the last Checkpoint Flag you had touched, without
resetting the level -- your keys, unlocked doors, etc. will be
preserved so you can retry.
* Set a maximum speed on the "Camera Follows Actor" logic of 64
pixels per tick. This results in a smoother scrolling transition
when the player jumps to a new location on the map, such as by
a Warp Door.
* Update the default color palettes:
* All: Add a "hint" magenta color.
* Colored Pencil: Add a "darkstone" solid color.
Updates to the Doodads JavaScript API:
* SetCheckpoint(Point(x, y)): set the player character's spawn
position. Giving it Self.Position() is an easy way to set the
player spawn to your doodad's location.
This commit adds the Thief character with starter graphics
(no animations).
The Thief walks back and forth and will steal items from other
doodads, including the player. For singleton items that have no
quantity, like the Colored Keys, the Thief will only steal one
if he does not already have it. Quantitied items like the
Small Key are always stolen.
Flexibility in the playable character is introduced: Boy,
Azulian, Bird, and Thief all respond to playable controls.
There is not currently a method to enable these apart from
modifying balance.PlayerCharacterDoodad at compile time.
New and Changed Doodads
* Thief: new doodad that walks back and forth and will steal
items from other characters inventory.
* Bird: has no inventory and cannot pick up items, unless player
controlled. Its hitbox has also been fixed so it collides with
floors correctly - not something normally seen in the Bird.
* Boy: opts in to have inventory.
* Keys (all): only gives themselves to actors having inventories.
JavaScript API - New functions available
* Self.IsPlayer() - returns if the current actor IS the player.
* Self.SetInventory(bool) - doodads must opt-in to having an
inventory. Keys should only give themselves to doodads having
an inventory.
* Self.HasInventory() bool
* Self.AddItem(filename, qty)
* Self.RemoveItem(filename, qty)
* Self.HasItem(filename)
* Self.Inventory() - returns map[string]int
* Self.ClearInventory()
* Self.OnLeave(func(e)) now receives a CollideEvent as parameter
instead of the useless actor ID. Notably, e.Actor is the
leaving actor and e.Settled is always true.
Other Changes
* Play Mode: if playing as a character which doesn't obey gravity,
such as the bird, antigravity controls are enabled by default.
If you `import antigravity` you can turn gravity back on.
* Doodad collision scripts are no longer run in parallel
goroutines. It made the Thief's job difficult trying to steal
items in many threads simultaneously!
* The Anvil doodad is affected by gravity and becomes dangerous when
falling. If it lands on the player character, you die! If it lands on
any other mobile doodad, it destroys it! It can land on solid doodads
such as the Electric Trapdoor and the Crumbly Floor. It will activate
a Crumbly Floor if it lands on one, and can activate buttons and
switches that it passes.
* JavaScript API: FailLevel(message) can be called from a doodad to kill
the player character. The Anvil does this if it collides with the
player while it's been falling.
* Instead of a simple "cur. ver != latest ver" check, parse the Major,
Minor and Patch components and do a detailed check.
* So a x.x.1 release could be made for a specific platform that had a
bad build, and it won't mind when it sees the latest version is the
older x.x.0 build that other platforms had working fine.
* Added a Settings window for game options, such as enabling the
horizontal toolbars in Edit Mode. The Settings window also has a
Controls tab showing the gameplay buttons and keyboard shortcuts.
* The Settings window is available as a button on the home screen OR
from the Edit->Settings menu in the EditScene.
* Bugfix: using WASD to move the player character now works better and
is considered by the game to be identical to the arrow key inputs. Boy
now updates his animation based on these keys, and they register as
boolean on/off keys instead of affected by key-repeat.
* Refactor the boolProps: they are all part of usercfg now, and if you
run e.g. "boolProp show-all-doodads true" and then cause the user
settings to save to disk, that boolProp will be permanently enabled
until turned off again.
* The "Use Key" (Q or Spacebar) now activates the Warp Door instead of a
collision event doing so.
* Warp Doors are now functional: the player opens a door, disappears,
the door closes; player is teleported to the linked door which opens,
appears the player and closes.
* If the player exits thru a Blue or Orange door which is disabled
(dotted outline), the door still opens and drops the player off but
returns to a Disabled state, acting as a one-way door.
* Clean up several debug log lines from Doodle and doodad scripts.
Adds support for sound effects in Doodle and configures some for various
doodads to start out with:
* Buttons and Switches: "Clicked down" and "clicked up" sounds.
* Colored Doors: an "unlocked" sound and a "door opened" sound.
* Electric Door: sci-fi sounds when opening and closing.
* Keys: sound effect for collecting keys.
JavaScript API for Doodads adds a global function `Sound.Play(filename)`
to play sounds. All sounds in the `rtp/sfx/` folder are pre-loaded on
startup for efficient use in the app. Otherwise sounds are lazy-loaded
on first playback.
* Tightens up the surface area of API methods available to the
JavaScript VMs for doodads. Variables and functions are carefully
passed in one-by-one so the doodad script can only access intended
functions and not snoop on undocumented APIs.
* Wrote tons of user documentation for Doodad Scripts: documented the
full surface area of the exposed JavaScript API now that the surface
area is known and limited.
* Early WIP code for the Campaign JSON
* Player character now experiences acceleration and friction when
walking around the map!
* Actor position and movement had to be converted from int's
(render.Point) to float64's to support fine-grained acceleration
steps.
* Added "physics" package and physics.Vector to be a float64 counterpart
for render.Point. Vector is used for uix.Actor.Position() for the sake
of movement math. Vector is flattened back to a render.Point for
collision purposes, since the levels and hitboxes are pixel-bound.
* Refactor the uix.Actor to no longer extend the doodads.Drawing (so it
can have a Position that's a Vector instead of a Point). This broke
some code that expected `.Doodad` to directly reference the
Drawing.Doodad: now you had to refer to it as `a.Drawing.Doodad` which
was ugly. Added convenience method .Doodad() for a shortcut.
* Moved functions like GetBoundingRect() from doodads package to
collision, where it uses its own slimmer Actor interface for just the
relevant methods it needs.
* Two-state Buttons now also subscribe to the state change message, so
other on/off buttons in the same level update to match the state of
the button that was hit.
* Add lock mutexes around the scripting engine to protect from
concurrent event handlers.
Add new doodads:
* Start Flag: place this in a level to set the spawn point of the player
character. If no flag is found, the player spawns at 0,0 in the top
corner of the map. Only use one Start Flag per level, otherwise the
player will randomly spawn at one of them.
* Crumbly Floor: a solid floor that begins to shake and then fall apart
after a moment when a mobile character steps on it. The floor respawns
after 5 seconds.
* State Blocks: blue and orange blocks that toggle between solid and
pass-thru whenever a State Button is activated.
* State Button: a solid "ON/OFF" block that toggles State Blocks back
and forth when touched. Only activates if touched on the side or bottom;
acts as a solid floor when walked on from the top.
New features for doodad scripts:
* Actor scripts: call SetMobile(true) to mark an actor as a mobile mob
(i.e. player character or enemy). Other doodads can check if the actor
colliding with them IsMobile so they don't activate if placed too close
to other (non-mobile) doodads in a level. The Blue and Red Azulians
are the only mobile characters so far.
* Message.Broadcast allows sending a pub/sub message out to ALL doodads
in the level, instead of only to linked doodads as Message.Publish does.
This is used for the State Blocks to globally communicate on/off status
without needing to link them all together manually.
* Improve the collision detection algorithm so that Actor OnCollide
scripts get called more often WHILE an actor is moving, to prevent a
fast-moving actor from zipping right through the "solid" hitbox and
not giving the subject actor time to protest the movement.
* It's implemented by adding a `Settled` boolean to the OnCollide event
object. When the game is testing out movement, Settled=false to give
the actor a chance to say "I'm solid!" and have the moving party be
stopped early.
* After all this is done, for any pair of actors still with overlapping
hitboxes, OnCollide is called one last time with Settled=true. This is
when the actor should run its actions (like publishing messages to
other actors, changing state as in a trapdoor, etc.)
* The new collision detection algorithm works as follows:
* Stage 1 is the same as before, all mobile actors are moved and
tested against level geometry. They record their Original and New
position during this phase.
* Stage 2 is where we re-run that movement but ping actors being
intersected each step of the way. We trace the steps between
Original and New position, test OnCollide handler, and if it returns
false we move the mobile actor to the Last Good Position along the
trace.
* Stage 3 we run the final OnCollide(Settled=true) to let actors run
actions they wanted to for their collide handler, WITHOUT spamming
those actions during Stage 2.
* This should now allow for tweaking of gravity speed and player speed
without breaking all actor collision checking.
* If the current edit tool is Actor or Link, use the new drawtool.Stroke
object to draw visual lines connecting every pair of linked actors in
the level. The lines are hidden during normal editing and gameplay and
only appear when you're possibly manipulating your actors and links.
* Add a Level Exit doodad, which for now is a little blue flag on a pole
that reads "END"
* JavaScript API: global function EndLevel() will end the level. The
exit doodad calls this when touched by the player.
* Add a "Level Completed" alert box UI to PlayScene with dynamic button
layouts.
* The alert box pops up when a doodad calls EndLevel() and contains
action buttons what to do next.
* "Play Again" restarts the current level again.
* "Edit Level" if you came from the EditorScene; otherwise this button
is not visible.
* "Next Level" is a to-be-implemented button to advance in the single
player story mode. Only shows up when PlayScene.HasNext=true.
* "Exit to Menu" is always visible and closes out to the MainScene.
* Refactor texture caching in render.Engine:
* New interface method: NewTexture(filename string, image.Image)
* WASM immediately encodes the image to PNG and generates a JavaScript
`Image()` object to load it with a data URI and keep it in memory.
* SDL2 saves the bitmap to disk as it did before.
* WASM: deprecate the sessionStorage for holding image data. Session
storage methods panic if called. The image data is directly kept in
Go memory as a js.Value holding an Image().
* Shared Memory workaround: the level.Chunk.ToBitmap() function is where
chunk textures get cached, but it had no access to the render.Engine
used in the game. The `pkg/shmem` package holds global pointers to
common structures like the CurrentRenderEngine as a work-around.
* Also shmem.Flash() so Doodle can make its d.Flash() function
globally available, any sub-package can now flash text to the screen
regardless of source code location.
* JavaScript API for Doodads now has a global Flash() function
available.
* WASM: Handle window resize so Doodle can recompute its dimensions
instead of scaling/shrinking the view.
* Implement the pub/sub message passing system that lets the JavaScript
VM of one actor (say, a Button) send messages to other linked actors
in the level (say, an Electric Door)
* Buttons now emit a "power(true)" message while pressed and
"power(false)" when released. Sticky Buttons do not release and so do
not send the power(false) message.
* Electric Doors listen for the "power" event and open or close
themselves based on the boolean value received.
* If a Sticky Button receives power and is currently pressed down, it
will pop back up (reset to "off" position) and notify its linked
actors that they have lost power too. So if a Sticky Button held an
Electric Door open, and another Button powers the Sticky Button, it
would pop back up and also close the Electric Door.
* Events.OnCollide now receives a CollideEvent object, which makes
available the .Actor who collided and the .Overlap rect which is
zero-relative to the target actor. Doodad scripts can use the .Overlap
to see WHERE in their own box the other actor has intruded.
* Update the LockedDoor and ElectricDoor doodads to detect when the
player has entered their inner rect (since their doors are narrower
than their doodad size)
* Update the Button doodads to only press in when the player actually
touches them (because their sizes are shorter than their doodad
height)
* Update the Trapdoor to only trigger its animation when the board
along its top has been touched, not when the empty space below was
touched from the bottom.
* Events.OnLeave now implemented and fires when an actor who was
previously intersecting your doodad has left.
* The engine detects when an event JS callback returns false.
Eventually, the OnCollide can return false to signify the collision is
not accepted and the actor should be bumped away as if they hit solid
geometry.
* Add a Red Azulian as a test for mobile enemies.
* Its A.I. has it walk back and forth, changing directions when it
comes up against an obstacle for a few moments.
* It plays walking animations and can trigger collision events with
other Doodads, such as the Electric Door and Trapdoor.
* Move Gravity responsibility to the doodad scripts themselves.
* Call `Self.SetGravity(true)` to opt the Doodad in to gravity.
* The canvas.Loop() adds gravity to any doodad that has it enabled.
* Add some encoding/decoding functions for binary msgpack format for
levels and doodads. Currently it writes msgpack files that can be
decoded and printed by Python (mp2json.py) but it can't re-read from
the binary format. For now, levels will continue to write in JSON
format.
* Add filesystem abstraction functions to the balance/ package to search
multiple paths to find Levels and Doodads, to make way for
system-level doodads.
* CLI: fix the `doodad convert` command to share the same Palette when
converting each frame (layer) of a doodad so subsequent layers find
the correct color swatches for serialization.
* Scripting: add timers and intervals to Doodad scripts to allow them to
animate themselves or add delayed callbacks. The timers have the same
API as a web browser: setTimeout(), setInterval(), clearTimeout(),
clearInterval().
* Add support for uix.Actor to change its currently rendered layer in
the level. For example a Button Doodad can set its image to Layer 1
(pressed) when touched by the player, and Trapdoors can cycle through
their layers to animate opening and closing.
* Usage from a Doodad script: Self.ShowLayer(1)
* Default Doodads: added scripts for all Buttons, Doors, Keys and the
Trapdoor to run their various animations when touched (in the case of
Keys, destroy themselves when touched, because there is no player
inventory yet)
* Add the JavaScript system for Doodads to run their scripts in levels,
and wire initial OnCollide() handler support.
* CLI: Add a `doodad install-script` command to the doodad tool.
* Usage: `doodad install-script <index.js> <filename.doodad>`
* Add dev-assets folder for storing source files for the official
default doodads, sprites, levels, etc. and for now add a JavaScript
for the first test doodad.
