Notes on running Fedora Linux on a Macbook (Air 2015).
Updated September 19, 2018 on Fedora 28 (Xfce Desktop).
Most functionality works out of the box. The function keys to control the display
brightness, keyboard backlight brightness, and media playback control all work
fine. The keys for Mission Control and Dashboard are recognized by X11 as keys
XF86LaunchB respectively, and could be bound to custom
application shortcuts or whatever.
For example I bound the Dashboard key to
xfdashboard which gives me a GNOME 3
like overview of my desktop that I’ll probably never use.
The WiFi chip in the Macbook Air is a Broadcom device that uses the
It’s easily available from RPMFusion via the
akmod-wl package and then you
never need to worry about it again.
Use a USB to Ethernet adapter or use USB tethering from your mobile phone to
The webcam on the Macbook is a strange device because it’s registered on the motherboard as a PCIe device rather than USB like what most laptop webcams are.
There are generic USB video drivers that work for all USB cameras but there aren’t generic PCIe drivers because PCIe cameras are rare.
I found this project for a Linux driver that gets the camera to work, but I haven’t tested it.
The Bluetooth quality is pretty bad, with audio lagging and hanging and disconnecting a lot. I haven’t tried other kinds of Bluetooth functionality.
Inserting a USB Bluetooth adapter caused the system to prioritize that device over the built-in which worked around any audio problems.
Make a Fedora USB stick like usual. Hold Option when booting the Macbook and choose the Fedora Media from USB to boot.
I found that rEFIt/rEFInd are no longer necessary when installing Fedora. Just free up some partition space and allow Fedora to automatically create a partition layout, and it sets up a /boot/efi HFS+ partition automatically to make the OS bootable. Manual instructions for this are available for Debian and Arch, etc.
GRUB installs itself and things work just like any other PC. In Fedora (as of v22), the GRUB menu lists a couple entries for Mac OS X (32-bit and 64-bit) but neither one works. Booting Fedora works though.
To boot OS X, hold down the Option key during boot and pick OS X from the firmware bootloader. If you want OS X to be the default OS you can pick it as the System Disk from within OS X’s settings. In this case, to boot Linux you’d hold Option on boot and choose Fedora, which takes you to GRUB and then you boot Fedora from there.
When I first started running Fedora on my Macbook it was Fedora 22 and the display backlight keys didn’t work, so I wrote a script to do this the hard way. The script may still be useful if this problem comes back again.
See https://sh.kirsle.net/mb-brightness for this. The keyboard brightness keys (in Xfce at least) don’t work; they show a brightness graph but the actual brightness doesn’t change. This script uses root to write brightness values to files in /sys.
In case that link stops working, it basically manipulates values in these two files (writable only to root):
BRIGHTNESS = "/sys/class/backlight/intel_backlight/brightness" MAX_BRIGHTNESS = "/sys/class/backlight/intel_backlight/max_brightness"
MAX_BRIGHTNESS has some arbitrary value like
2777 and you just write a
number between 0 and
MAX_BRIGHTNESS into the other file.
# to set the display to 50% brightness, you get the max brightness $ cat /sys/class/backlight/intel_backlight/max_brightness 2777 # divide it in half $ perl -E 'say 2777 / 2' 1388.5 # write that into the brightness file $ echo 1388 | sudo tee /sys/class/backlight/intel_backlight/brightness
powertop to tune the battery. The easiest thing is to just make it run
--auto-tune automatically on boot via systemd.
powertop package comes with a systemd service you can enable. If you don’t have one for some reason, create
/etc/systemd/system/powertop.service with these contents:
[Unit] Description=Powertop tunings [Service] Type=oneshot ExecStart=/sbin/powertop --auto-tune [Install] WantedBy=multi-user.target
And enable the service with
sudo systemctl enable powertop.service
Other things to mess with are
powertop --calibrate and
With this you can typically squeeze 7+ hours of battery life out of the 13” Macbook Air 2015 (which gets about 12 hours battery life under OS X, but this is possibly the best you can do with non-Apple software on a Macbook).
This section provides some tips on changing keyboard settings. All of these are temporary (they don’t persist across reboots), and making them permanent varies from distro to distro. Arch Linux and Ubuntu make them permanent by adding configs to
/etc/modprobe.d/hid_apple.conf and maybe rebuilding the initramfs (Fedora uses
dracut and this whole method does not work).
The way to make these changes permanent in Fedora is to use systemd’s
rc.local compatibility service. This works as of Fedora 22.
Create a shell script at
/etc/rc.d/rc.local with the commands below for the features you want to enable. For example:
#!/bin/bash echo 0 | tee /sys/module/hid_apple/parameters/iso_layout echo 1 | tee /sys/module/hid_apple/parameters/swap_opt_cmd
Make the script executable (
sudo chmod 0755 /etc/rc.d/rc.local) and reboot.
The keyboard layout on the Macbook maps the tilde/backtick key to
> under Linux. The fix that works for me is:
$ echo 0 | sudo tee /sys/module/hid_apple/parameters/iso_layout
By default the Option/Alt key is mapped as Alt in Linux, and the Command key is mapped to Super (equivalent to the Windows key on a PC). To swap these the other way around, so e.g. Command+Tab brings up the window switcher instead of Alt+Tab (as it does under Mac OS X), do this:
$ echo 1 | sudo tee /sys/module/hid_apple/parameters/swap_opt_cmd
By default if you want to input a function key (F1-F12) you have to hold Fn and press the key you want. Otherwise those keys map to the media keys when pressed. You can swap this behavior backwards (sort of like a
Fn Lock feature of some PCs), so that the keys will input their function key when pressed and you need to hold Fn down to input the media key.
# FnLock ON $ echo 2 | sudo tee /sys/module/hid_apple/parameters/fnmode # FnLock OFF $ echo 1 | sudo tee /sys/module/hid_apple/parameters/fnmode
If you echo
0 into it, it effectively disables the
Fn key. So pressing
Fn+F11 is the same as pressing
F11 and this renders the media functions inaccessible.